From RepRap
Jump to: navigation, search
Crystal Clear action run.png

Release status: working

Teebot Max V2.jpg
Folding 3D printer.
ShareAlike Creative Commons V3 (CC-BY-SA 3.0)
CAD Models
External Link

All information of this page was taken from [2].


TeeBotMax is a RepRap printer. Designed by Emmanuel Adetutu (Aka Teetopsy)

The design is highly inspired by the fantastic FoldaRap and Prusa i3 3D printers.

The files/ build instruction here are provided for you to print, build, experiment and evolve the design how you choose, please share your experiences and modifications and do let me know if you build one.

Thank you for your interest, please be aware and abide by the license all these files for the TeeBotMax folding printer are covered by - Attribution - ShareAlike Creative Commons V3 (CC BY-SA 3.0) - http://creativecommons.org/licenses/by-sa/3.0/

This License is not greatly restrictive at all, so please don't forget to attribute my work and acknowledge the work by others that this is built on.

Many open source designed 3D printer have inspired the design of TeeBotMax. Many thanks for sharing: to all the open source developers worldwide over.

    • Special thanks to - Josef Prusa (Prusa I3), Emmanuel Gilloz (FoldaRap), Richard Horne (Richrap), Reifsnyderb (J head Hotend) just to mention a few.

If you wish to say hello or support me in building and developing more 3D printers and 3d models, you can source your parts/kits from The Netherlands here - [3]

YouTube Channel - https://www.youtube.com/channel/UCtLCgHFCWepJoldmkR2L7lA

Please see www.reprap.org for information about the RepRap Projects. Please visit the RepRap forum - http://forums.reprap.org/

Many thanks


TeeBotMax folded.JPG

Build Instructions and files

All files will be made available on github

The github repo here [4] An a more fancy product page here[5]

Almost any RepRap extruder can be mounted on TeeBotMax with little or no adaptation. The original TeeBotMax prototype used a TeeStruder. (Some extruders are designed to fit the Vertical X Axis Standard; what's the easiest way to mount them on a TeeBotMax?)

Modification and improvements

Thanks to early adopters, builders and the open-source community, following the initial release of the teebotmax files, I have received a lot of feedback most of the suggested improvements have now been implemented..

The new Look TeeBotMax_V2 Teebot Max V2.jpg

When folded TeeBotMax_V2 Teebot Max V2 folded.jpeg

When folded the printer is about 40cm x 50cm x 25cm tall. All electronics mounted and secure under the printer.

The actual build Teebot Max V2built.jpeg