New pages
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)
- 11:39, 15 February 2019 Rosalind-bill-of-materials (hist) [3,263 bytes] Qwazix (talk | contribs) (Make all thumbs 600px in size and normalize namespacing to `rosalind-`)
- 06:19, 13 February 2019 Dr. Hadi Rassael (hist) [3,434 bytes] Drhadirassael (talk | contribs) (Created page with " == Dr. Hadi Rassael cosmetic work == Dr. Hadi Michael Rassael is an expert cosmetic surgeon. He is having a number of years of knowledge in this profession. He is fervent ab...") (Tag: Contains External Link)
- 05:23, 12 February 2019 Sott Damron Castle Medical (hist) [3,197 bytes] Scottdamron (talk | contribs) (Created page with " == Scott Damron Atlanta Based Entrepreneur == '''Scott Damron''' is the chief innovator of Castle Medical, and he always wanted to make a medical laboratory. But he was not...") (Tag: Contains External Link)
- 02:52, 12 February 2019 3-D printing/ua (hist) [266 bytes] Edlab (talk | contribs) (Created page with "{{Languages|3-D printing}} ---- Explainations: 3D printing and 3D printers: * Wikipedia:3D_printing * http://www.appropedia.org/3-D_printing Fused filament fabricatio...")
- 02:52, 12 February 2019 3-D printing/ru (hist) [266 bytes] Edlab (talk | contribs) (Created page with "{{Languages|3-D printing}} ---- Explainations: 3D printing and 3D printers: * Wikipedia:3D_printing * http://www.appropedia.org/3-D_printing Fused filament fabricatio...")
- 03:57, 11 February 2019 Glue gun/ua (hist) [1,092 bytes] Edlab (talk | contribs) (Created page with "{{Languages|Glue gun}} ---- A '''Glue gun''' attached to a reprap or other 3D printer. Perhaps the original glue-gun based RepStrap was the 2008 FTIStrap. Leg...")
- 03:57, 11 February 2019 Glue gun/ru (hist) [1,142 bytes] Edlab (talk | contribs) (Created page with "{{Languages|Glue gun}} ---- A '''Glue gun''' attached to a reprap or other 3D printer. Perhaps the original glue-gun based RepStrap was the 2008 FTIStrap. Leg...")
- 05:06, 4 February 2019 Otherlinks (hist) [2,313 bytes] Otherlinks (talk | contribs) (Otherlinks create modern streetwear using the best fabrics and imbue them with the design and spirit of street art.)
- 15:05, 3 February 2019 Franklin:MOST (hist) [9,807 bytes] J.M.Pearce (talk | contribs) (Created page with "{{MOST}} This page describes how to install [https://github.com/mtu-most/franklin Franklin] on your Athena. This is meant for students of [[MY4777]...")
- 10:06, 1 February 2019 PLA/ua (hist) [15,106 bytes] Edlab (talk | contribs) (Created page with "{{languages}} ''For a list of filament suppliers see -->'' Printing Material Suppliers.<br><br> '''Polylactic acid''' ('''PLA''') is a bio-degradable polymer that can be...")
- 12:14, 29 January 2019 Distributed recycling of post-consumer plastic waste in rural areas (hist) [5,615 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} M. Kreiger, G. C. Anzalone, M. L. Mulder, A. Glover and J. M Pearce (2013). Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas. MRS...")
- 12:10, 29 January 2019 Open-source hardware for research and education (hist) [1,210 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Open-source hardware for research and education== <u>Source:</u> J.M. Pearce, “[http://dx.doi.org/10.1063/PT.3.2160 Commentary: Open-source hardware for resear...")
- 12:06, 29 January 2019 Open-source colorimeter (hist) [6,665 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} 500px|right This project details an '''open-source colorimeter''', which is made from open source electronics and 3-D printable components....")
- 11:59, 29 January 2019 Corn sheller (hist) [2,219 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right|400px {|style="border:1px solid black; background-color: lightgreen; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" ali...")
- 11:39, 29 January 2019 Delta Build Workshop (hist) [2,549 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} image:deltabuild.jpg =Schedule of Events= ==At least two weeks prior to workshop== * Distribute [http://3d4edu.com/WorkshopPreparation.pdf int...")
- 11:17, 29 January 2019 Open-source mobile water quality testing platform (hist) [8,718 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} 350px|right This project details an '''open source water testing platform''' derived from the open-source colorimeter, which is...")
- 08:26, 29 January 2019 PID Tuning/ru (hist) [8,806 bytes] Edlab (talk | contribs) (Created page with "{{Languages|PID Tuning}} ---- [https://en.wikipedia.org/wiki/PID_controller PID] tuning refers to the parameters adjustment of a proportional-integral-derivative control algo...")
- 21:47, 27 January 2019 Open-source nanotechnology: solutions to a modern intellectual property tragedy (hist) [2,540 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} frame|right|thumb|none|200px|Hacking through the nanotech patent thicket * Joshua M. Pearce, Open-source nanotechnology: Solutions to a modern...")
- 21:46, 27 January 2019 A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (hist) [4,251 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * Joshua M. Pearce. [http://dx.doi.org/10.1016/j.wpi.2015.07.003 A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D...")
- 21:34, 27 January 2019 Open-Source Photometric System for Enzymatic Nitrate Quantification (hist) [12,926 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * Wittbrodt BT, Squires DA, Walbeck J, Campbell E, Campbell WH, Pearce JM. (2015) [http://journals.plos.org/plosone/article?id=10.1371/journal.pone....")
- 21:25, 27 January 2019 3D Metal Printing Slicer Plugin (hist) [5,832 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==3D Metal Printing Slicer Plugin== This is a plugin for the slicing software Cura which will create G-Code specific for the MOST delta Open-source metal 3-D printe...")
- 21:24, 27 January 2019 Aluminum substrate cleaning for 3-D printing:MOST (hist) [1,787 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} category: MOST methods category:Metal 3D printing '''STANDARD OPERATING PROCEDURE''' '''FOR:''' ALUMIN...")
- 21:21, 27 January 2019 Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program (hist) [2,488 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} ==Source== right Irwin, J. L., Pearce, J. M., Anzalone, G. C., (2014) Implementing Self-Replicating Rapid Prototypers (RepRaps...")
- 21:20, 27 January 2019 The RepRap 3-D Printer Revolution in STEM Education (hist) [2,689 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} right ==Source== J. Irwin, J.M. Pearce, D. Opplinger, and G. Anzalone. [http://www.asee.org/file_server/papers/attachment/fil...")
- 21:16, 27 January 2019 Evaluation of RepRap 3D Printer Workshops in K-12 STEM (hist) [1,928 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} {{TOC_right}} ==Source== * J.L. Irwin, D.E. Oppliger, J.M. Pearce, G. Anzalone, [http://www.asee.org/file_server/papers/attachment/file/0005/4988/ase...")
- 21:14, 27 January 2019 Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom (hist) [4,428 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} ==Source== * Chelsea Schelly, Gerald Anzalone, Bas Wijnen, Joshua M. Pearce (2015). [http://www.sciencedirect.com/science/article/pii/S1045926X150000...")
- 12:22, 27 January 2019 Polymer recycling codes for distributed manufacturing with 3-D printers (hist) [8,966 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} right ==Source== * Emily J. Hunt, Chenlong Zhang, Nick Anzalone, Joshua M. Pearce, [http://dx.doi.org/10.1016/j.resconrec.2015...")
- 12:12, 27 January 2019 Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (hist) [3,127 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * B.T. Wittbrodt & J.M. Pearce. Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking. ''Solar Energy'' '''117'''...")
- 12:11, 27 January 2019 Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto (hist) [5,675 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * Pearce, J. M. (2015). [http://www.gacetasanitaria.org/es/maximizar-rentabilidad-inversion-salud-publica/articulo/S0213911115000679/ Maximizar la rentabi...")
- 12:10, 27 January 2019 Building Open Source Hardware in Academia (hist) [3,057 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== Joshua M. Pearce, “Open Source Hardware in Academia” in Alicia Gibb (Ed.) ''[http://www.pearsonhighered.com/educator/product/Building-Open-Source-Hard...")
- 12:00, 27 January 2019 MOST quad delta RepRap (hist) [1,461 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} category:MOST methods The MOST quad-delta RepRap is a deltabot RepRap built off of the Athena open source 3-D printer model that allows one t...")
- 11:38, 26 January 2019 Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells (hist) [21 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== * Mehdi Sadatgol, Nupur Bihari, Joshua M. Pearce, and Durdu O. Guney, "[https://www.osapublishing.org/ome/fullte...")
- 11:37, 26 January 2019 Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms (hist) [3,953 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== * Ankit Vora, Satyadhar Joshi, Arun Matai, Joshua M. Pearce, Durdu Guney. [http://bvicam.ac.in/news/INDIACom%202018%20P...")
- 11:32, 26 January 2019 Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography (hist) [21 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== * Chenlong Zhang, Jephias Gwamuri, Sandra Cvetanovic, Mehdi Sadatgol, Durdu O Guney and Joshua M Pearce [https://doi....")
- 11:30, 26 January 2019 Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation (hist) [118 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * Vora, A., Gwamuri, J., Pearce, J. M., Bergstrom, P. L. and Guney, D. [http://scitation.aip.org/content/aip/journal/jap/116/9/10.1063/1.4895099 Multi-re...")
- 11:28, 26 January 2019 Plasmonic Perfect Meta-Absobers for a-Si PV Devices (hist) [0 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{Lit}} {{TOC_right}} This page is part of a project for my PhD at Michigan Tech under my adviser Dr. Pearce. = Optical and Plasmonic Per...")
- 11:26, 26 January 2019 Controlling optical absorption in metamaterial absorbers for plasmonic solar cells (hist) [21 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right|600px ==Source== * Wyatt Adams, Ankit Vora, Jephias Gwamuri, Joshua M. Pearce, Durdu Ö. Guney. [http://proceedings.spiedigitall...")
- 12:46, 25 January 2019 Advances in plasmonic light trapping in thin-film solar photovoltaic devices (hist) [26 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== J. Gwamuri, D. Ö. Güney and J. M. Pearce, "Advances in Plasmonic Light Trapping in Thin-Film Solar Photovoltaic Devices",...")
- 12:40, 25 January 2019 Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices (hist) [21 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} 500px|right ==Source== * Jephias Gwamuri, Murugesan Marikkannan, Jeyanthinath Mayandi, Patrick K. Bowen, and Joshua M. Pearce. [http://www.mdpi...")
- 12:36, 25 January 2019 Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices (hist) [113 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right|600px ==Source== Jephias Gwamuri, Ankit Vora, Rajendra R. Khanal, Adam B. Phillips, Michael J. Heben, Durdu O. Guney, Paul Bergstrom,Ana...")
- 12:33, 25 January 2019 A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices (hist) [23 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} 500px|right ==Source== * Jephias Gwamuri, Ankit Vora, Jeyanthinath Mayandi, Durdu Ö. Güney, Paul L. Bergstrom, Joshua M. Pearce. [http://d...")
- 12:28, 25 January 2019 Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography (hist) [27 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== * C. Zhang, D. O. Guney, J. M. Pearce. [http://dx.doi.org/10.1088/2053-1591/3/10/105034 Plasmonic enhancement of amorphous s...")
- 11:36, 24 January 2019 Chenlong Nanobeads Project (hist) [1,642 bytes] Hmreish (talk | contribs) (Created page with " {{MOST}} category:MOST methods For full details see ''MethodsX'' paper: Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography # cleaning: Si w...")
- 11:32, 24 January 2019 Perkin-Elmer RF Sputtering System-6 Inch protocol: MOST (hist) [28 bytes] Hmreish (talk | contribs) (Created page with " {{MOST}} category:MOST methods = Introduction = ==Background on RF Sputtering System== Physical sputtering is driven by momentum exchange between the ions and atoms...")
- 11:30, 24 January 2019 Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography (hist) [3,165 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} right ==Source== * Chenlong Zhang, Sandra Cvetanovic, Joshua M. Pearce. [https://doi.org/10.1016/j.mex.2017.07.001 Fabricating Ordered 2-D Na...")
- 11:27, 24 January 2019 Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities (hist) [4,551 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} {{Pearce-pubs}} ==Source== * J. Gwamuri, Joshua M. Pearce, "Open source 3D printers: an appropriate technology for building low cost optics labs for the developing c...")
- 11:22, 24 January 2019 3-D printing open-source click-MUAC bands for identification of malnutrition (hist) [2,439 bytes] Hmreish (talk | contribs) (Created page with "{{MOST}} ==Source== * Michaels, R.E. and Pearce, J.M. (2017). 3-D printing open-source click-MUAC bands for identification of malnutrition. ''Public Health Nutrition'', 20(11...")
- 11:18, 24 January 2019 Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid (hist) [3,009 bytes] Hmreish (talk | contribs) (Created page with " {{MOST}} {{MOST-RepRap}} ==Source== * Wijnen, B., Sanders, P. & Pearce, J.M. Improved model and experimental validation of deformation in fused filament fabrication of polyl...")
- 11:16, 24 January 2019 Factors effecting real-time optical monitoring of fused filament 3D printing (hist) [2,778 bytes] Hmreish (talk | contribs) (Created page with " {{MOST}} {{Pearce-pubs}} {{MOST-RepRap}} ==Source== * Nuchitprasitchai, S., Roggemann, M. & Pearce, J.M. [https://link.springer.com/article/10.1007/s40964-017-0027-x Factors...")
- 11:14, 24 January 2019 Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (hist) [3,179 bytes] Hmreish (talk | contribs) (Created page with " {{MOST}} {{MOST-RepRap}} ==Source== * Nuchitprasitchai, S., Roggemann, M. & Pearce, J.M. [http://www.mdpi.com/2504-4494/1/1/2 Three Hundred and Sixty Degree Real-Time Monito...")
