Upload log
Below is a list of the most recent file uploads. See the gallery of new files for a more visual overview.
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 20:12, 12 March 2024 VikOlliver (talk | contribs) uploaded File:2024-03-13-084007 annotated.jpg (Annotated image showing deposition made with a 40μm hypodermic tip.)
- 03:29, 11 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap logo.png (RepRap logo with a micron in the middle)
- 00:24, 7 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap first test rig.jpg (Initial test rig using OpenFlexure Delta stage with a single functional stepper and a wire probe being observed through a microscope.)
- 23:51, 6 March 2024 VikOlliver (talk | contribs) uploaded File:Probe tip and hypodermic.png (Tip of a 24 gauge hypodermic needle (right) and an electrically etched probe top with a tip radius of approximately 0.25µm)
- 04:31, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Ratrig.jpg
- 02:22, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Voron.jpg (Voron 0.2)
- 17:45, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Stage one complete.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 before.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after.png
- 17:32, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after image 2.png
- 17:32, 20 February 2024 Seumag (talk | contribs) uploaded File:Pld sap flanges.png (more up to date version of the design)
- 17:29, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4b before.png
- 17:27, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4a after.png
- 17:26, 20 February 2024 Engineeringfeind (talk | contribs) uploaded a new version of File:Step 2 after.png
- 17:24, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 after.png
- 14:39, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape mech.jpg (tape mechanism with apertures)
- 14:38, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture cut.jpg (apertures being cut)
- 14:37, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture det.jpg (Details of aperture cut onto tape)
- 14:36, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape apertures.jpg (example of apertures cut onto the tape)
- 11:10, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism depo.png (PLD-SAP mechanism, during deposition)
- 11:09, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism cut.png (PLD_SAP diagram, cutting masks)
- 11:00, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism side.png (Diagram of main mechanism)
- 10:22, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD Cale.png (CAD Design, full)
- 09:54, 16 February 2024 Seumag (talk | contribs) uploaded File:Aligner Scheme.png (Diagram explaining the alignment mechanism)
- 09:51, 16 February 2024 Seumag (talk | contribs) uploaded File:Inertial slider.jpg (Prototype for the tape adjusting mechanism)
- 09:48, 16 February 2024 Seumag (talk | contribs) uploaded File:Ajuste cinta.png (tape adjusting mechanism, cad)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Mask cut.png (mask aperture cutting)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Tape fab.png (mask's tape fabrication process)
- 09:16, 16 February 2024 Seumag (talk | contribs) uploaded File:Carrusel.png (Target carrousel design for the first implementation)
- 09:15, 16 February 2024 Seumag (talk | contribs) uploaded File:Mec cinta.png (tape driving mechanism for the first implementation)
- 09:14, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD flange.jpg (overview of first implementation)
- 17:06, 15 February 2024 Seumag (talk | contribs) uploaded File:PLD standard in.jpg (View into the chamber)
- 17:03, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld v0 setup.jpg (Standard configuration of the old PLD setup)
- 16:38, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG process.png (Naive fabrication process by MM-PLD)
- 16:37, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG.png (naive diagram of BCTG TFT)
- 16:35, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld sap front.png (PLD-SAP CAD front view)
- 15:42, 15 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 hotend dissasembly.png
- 01:39, 15 February 2024 Hammersamatom (talk | contribs) uploaded File:Klipper logo.png (Logo of the Klipper firmware project)
- 23:18, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two coupler dissasembly.png
- 23:16, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two dissasembly.png
- 22:24, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00264.png
- 22:15, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00263.png (a before photo for Cu1 printer assembly instructions)
- 10:26, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:22, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:19, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 07:25, 25 June 2023 Adrianbowyer (talk | contribs) uploaded File:Science-museum.jpg
- 18:58, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Template Cairo30 3D Printer Image.jpg
- 18:57, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 feature01.jpg
- 18:26, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Front Image.jpg
- 18:22, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Side Image new edited.jpg