All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 06:24, 5 August 2012 Skyfanatic (talk | contribs) uploaded File:Mk2a Central Mount Point.jpg
- 06:16, 5 August 2012 Skyfanatic (talk | contribs) uploaded File:Mk2a.jpg
- 06:01, 5 August 2012 Skyfanatic (talk | contribs) uploaded File:Mk2a Through Hole.jpg
- 18:02, 3 August 2012 Skyfanatic (talk | contribs) uploaded File:PCB heatedbed Mk2a.brd
- 13:04, 23 January 2012 Skyfanatic (talk | contribs) uploaded File:Plated holes.jpg
- 12:49, 23 January 2012 Skyfanatic (talk | contribs) uploaded File:UnplatedHoles.jpg (Picture to illustrate what the holes will look like on an un-plated (ie etched directly from copper) board)
- 10:58, 6 January 2012 Skyfanatic (talk | contribs) uploaded File:SDSL assembled.jpg
- 10:54, 6 January 2012 Skyfanatic (talk | contribs) uploaded File:SDSL schematic.jpg
- 10:46, 6 January 2012 Skyfanatic (talk | contribs) uploaded File:SDSL schematic.JPG
- 10:09, 6 January 2012 Skyfanatic (talk | contribs) uploaded File:SDSL mount.jpg
- 10:05, 6 January 2012 Skyfanatic (talk | contribs) uploaded File:SDSL reset.jpg (SDSL card mounted on a Sanguinololu board. Highlighted is the jumper that needs to be open in order for the Sanguinololu not to reset when the USB is disconnected. The ATMEGA chip is removed in this picture inoder to clearly show the reset jumper.)
- 12:51, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB Heatbed MK2 front small.jpg (The heating element side of the the MK2 PCB heatbed)
- 12:07, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB Heatbed MK2 therm hole.jpg (The through hole in the centre of the board for thermistor/thermocouple)
- 11:52, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB Heatbed MK2 connections.jpg (The connection points, either through hole or surface mount)
- 11:49, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB Heatbed MK2 LED.jpg (The PCB heatbed MK2 showing the through hole wires, resistor and one LED)
- 11:46, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB heatedbed Mk2.brd (The eagle .brd file for the MK2 PCB heated bed. This design is based on the Prusa MK1 heated bed and is released under the GPL V2)
- 11:36, 17 September 2011 Skyfanatic (talk | contribs) uploaded File:PCB Heatbed MK2 front.jpg (The heating element side of the the MK2 PCB heatbed)
- 09:34, 29 August 2011 User account Skyfanatic (talk | contribs) was created