All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 21:03, 27 October 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis STLs.zip (Modifications to the Z-axis bits in response to suggestions from Vik. The changes add stiffness to the assembly and also remove interference between the x-axis belt pulleys and the adjustment screw. )
- 21:01, 27 October 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis Assembly-Blender257.zip (Modifications to the top bracket and the bottom bracket of the z-axis to reflect adjustments in switch locations, and greater stiffness for the z-axis assembly.)
- 20:59, 27 October 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:AssemblyGuideV3sml.jpg (Quite a few changes to reflect development suggestions from Vik. Of note, are; The switch holder has been moved to keep the adjustment screw clear of the x-axis belts, the top brackets for the z-axis have been reshaped to give better stiffness to the z-a)
- 18:41, 26 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis STLs.zip (Two of the STLs have been changed from the previous edition. These are both of the z-axis base parts. The changes make the two ends have the same pattern and spacing for the bolt and screw holes. The drive support end also has been modified a little to)
- 18:39, 26 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis Assembly-Blender257.zip (The z-axis base ends have been modified to have the same bolt hole pattern and spacing and the clearance between the z-axis frame and the big gear has been enlarged.)
- 18:35, 26 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:AssemblyGuideV3sml.jpg (Yeah OK, I just uploaded the wrong one. Try this instead)
- 18:33, 26 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:AssemblyGuideV3sml.jpg (Images changed to reflect the increased clearance between the z-axis drive support and the big gear and changes to the z-axis support base idler end so that the holes match the driven end.)
- 20:41, 23 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis STLs.zip (This edition included updated versions of the Z-axis printable components. The z-axis drive location has been shifted and many holes resized to allow a better fit.)
- 20:39, 23 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis Assembly-Blender257.zip (This edition has major changes to the z-axis drive base to sort out binding issues. Also most holes are slightly larger to allow easier fitting and less work with a drill.)
- 20:37, 23 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:AssemblyGuideV3sml.jpg (Z-Axis Assembly showing redesigned arrangement for the boot end drives. This arrangement should stop the binding that was occurring in the original arrangement.)
- 01:06, 15 September 2012 BouncyMonkey (talk | contribs) uploaded File:AssemblyGuideV3sml.jpg (A new guide to the Z-Axis developments. This image is to help identify the relevant STL for users.)
- 00:50, 15 September 2012 BouncyMonkey (talk | contribs) uploaded File:Rroofl Z-axis Assembly-Blender257.zip (This is a single Blender file containing all of the development models for the Rroofle Z-axis. It also includes other components so that it can all be made to line up properly. If we're lucky it may even be able to be made.)
- 00:47, 15 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Z-axis STLs.zip (The Zaxis assembly has been rejigged to make assembly easier and also enable Vik to use him Mallet more effectively when installing bearings. A limit switch fitting option has been added.)
- 01:48, 7 September 2012 BouncyMonkey (talk | contribs) uploaded a new version of File:Rroofl Dev Zaxisbits.jpg (A slightly smaller version of the file, so as not to dominate the page)
- 01:26, 7 September 2012 BouncyMonkey (talk | contribs) uploaded File:Rroofl Z-axis STLs.zip (The STLs for the Rroofl Z-axis development.)
- 01:26, 7 September 2012 BouncyMonkey (talk | contribs) uploaded File:Rroofl Z-axis Blender files.zip (Models used to develop the Rroofl Z-axis and Cross Slide bits. Also includes assembly model. All files for Blender 2.63. Older versions will not handle these properly.)
- 01:19, 7 September 2012 BouncyMonkey (talk | contribs) uploaded File:Rroofl Dev Zaxisbits.jpg (This is a guide to the files developed for the z-axis and cross slide drive.)
- 01:11, 7 September 2012 User account BouncyMonkey (talk | contribs) was created