All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 02:08, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder Assembly (SolidWorks).zip (This is a ZIP file containing the SolidWorks files for the dual extruder assembly that will be used by an OHM machine in the near future.)
- 02:07, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder Assembly.JPG (This is a picture of the conceptual OHM dual extruder assembly.)
- 01:56, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Extruder Assembly (SolidWorks).zip (This is a ZIP file containing the parts and assemblies of the SolidWorks mock-up of the Open Hybrid Mendel Extruder.)
- 01:55, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:Extruder Assembly.JPG (This is a picture of a SolidWorks mock-up of an Open Hybrid Mendel Extruder.)
- 01:50, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder STL Parts.zip (This is a zipped file of the STL parts necessary to build a dual extruder for an Open Hybrid Mendel (or to adapt to your own needs).)
- 01:46, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:Small extruder gear rev4.STL (This is an STL version of the small drive gear on the extruders used by Penn State's open hybrid mendels.)
- 01:45, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:Psu greg-wade hybrid extruder.STL (This is an STL version of the extruder body, redesigned by the PSU RepRap group, that is utilized by the Open Hybrid Mendel.)
- 01:43, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OpenXY bracket rev1.STL (This is an STL version of the OpenXY bracket that is used by the OHM to secure the carriage to the rails and allow it to ride smoothly.)
- 01:42, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:OpenX arm45 F.STL (This is an STL version of the OpenX arm used by the OHM to secure the carriage to the rails.)
- 01:41, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:Idler.STL (This is an STL version of the Idler used on the Open Hybrid Mendel.)
- 01:38, 11 December 2012 Bbv5002 (talk | contribs) uploaded File:Bens OpenX Dual Carriage.STL (This is an STL version of Ben Visnesky's OHM Dual Extruder Carriage design.)
- 06:59, 8 December 2012 Bbv5002 (talk | contribs) uploaded a new version of File:Bens OpenX Dual Carriage.SLDPRT (The SolidWorks part file for Ben Visnesky's OpenX Dual Extruder Carriage, designed for the Open Hybrid Mendel.)
- 06:32, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder SolidWorks Parts.zip (This is a ZIP file containing the SolidWorks parts files for a complete OHM Dual Extruder.)
- 06:09, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Psu greg-wade hybrid extruder.SLDPRT (The SolidWorks part file for the PSU Greg's Wade's Open Hybrid Mendel Extruder Body.)
- 06:08, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OpenXY bracket rev1.SLDPRT (The SolidWorks part file for the OpenXY Bracket, designed for the Open Hybrid Mendel OpenX Carriage.)
- 06:08, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OpenX arm45 F.SLDPRT (The SolidWorks part file for the OpenX 45 Arm, designed for the Open Hybrid Mendel Wade's Extruder.)
- 06:07, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Idler.SLDPRT (The SolidWorks part file for the idler, designed for an Open Hybrid Mendel Wade's Extruder.)
- 06:06, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Extruder gear rev4.SLDPRT (The SolidWorks part file for the stepper motor extruder gear.)
- 06:05, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Bens OpenX Dual Carriage.SLDPRT (The SolidWorks part file for Ben Visnesky's OpenX Dual Extruder Carriage, designed for the Open Hybrid Mendel.)
- 05:26, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder Assembly Side.jpg (This is what a fully assembled OHM dual extruder would look like from the side, with all hardware.)
- 05:25, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder Assembly Bottom.jpg (This is what a fully assembled OHM dual extruder would look like (from the bottom), with all the hardware.)
- 05:24, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extruder Assembly Isometric.jpg (This is what a fully assembled OHM dual extruder would look like, with the OpenX Carriage and Hardware.)
- 05:22, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extrusion MotorToMotor Measurement.jpg (This is what a bottom view of a motor to motor configuration of an OHM dual extruder would look like.)
- 05:21, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extrusion MotorToMotor.jpg (This is an isometric view of what a motor to motor configuration of an OHM dual extruder would look like.)
- 05:20, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extrusion GearToGear Measurement.jpg (This is a bottom view of what a gear to gear arrangement of an OHM dual extruder body would look like.)
- 05:19, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Dual Extrusion GearToGear.jpg (This is an isometric view of what a Gear to Gear arrangement for an OHM dual extruder would look like.)
- 05:18, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Bens OpenX Dual Carriage Top.jpg (This is a top view of Ben Visnesky's Dual Extruder OpenX Carriage.)
- 05:14, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:Bens OpenX Dual Carriage Isometric.jpg (This is an isometric view of Ben Visnesky's Dual Extruder OpenX Carriage.)
- 05:12, 8 December 2012 Bbv5002 (talk | contribs) uploaded File:OHM Single Extruder Isometric.jpg (This is a picture depicting a single Open Hybrid Mendel extruder.)
- 19:56, 9 October 2012 Bbv5002 (talk | contribs) uploaded File:OHMRodCutDiagram.jpg (This is a diagram that depicts how a set of 1 meter rods can be cut to size in order to provide the appropriate parts to assemble an Open Hybrid Mendel.)
- 18:39, 30 August 2012 User account Bbv5002 (talk | contribs) was created