File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 02:08, 11 December 2012 | OHM Dual Extruder Assembly (SolidWorks).zip (file) |  |
9.73 MB | This is a ZIP file containing the SolidWorks files for the dual extruder assembly that will be used by an OHM machine in the near future. | 1 |
| 02:07, 11 December 2012 | OHM Dual Extruder Assembly.JPG (file) |  |
186 KB | This is a picture of the conceptual OHM dual extruder assembly. | 1 |
| 01:56, 11 December 2012 | OHM Extruder Assembly (SolidWorks).zip (file) | |
8.78 MB | This is a ZIP file containing the parts and assemblies of the SolidWorks mock-up of the Open Hybrid Mendel Extruder. | 1 |
| 01:55, 11 December 2012 | Extruder Assembly.JPG (file) |  |
219 KB | This is a picture of a SolidWorks mock-up of an Open Hybrid Mendel Extruder. | 1 |
| 01:50, 11 December 2012 | OHM Dual Extruder STL Parts.zip (file) | |
1,007 KB | This is a zipped file of the STL parts necessary to build a dual extruder for an Open Hybrid Mendel (or to adapt to your own needs). | 1 |
| 01:46, 11 December 2012 | Small extruder gear rev4.STL (file) | |
890 KB | This is an STL version of the small drive gear on the extruders used by Penn State's open hybrid mendels. | 1 |
| 01:45, 11 December 2012 | Psu greg-wade hybrid extruder.STL (file) | |
150 KB | This is an STL version of the extruder body, redesigned by the PSU RepRap group, that is utilized by the Open Hybrid Mendel. | 1 |
| 01:43, 11 December 2012 | OpenXY bracket rev1.STL (file) | |
28 KB | This is an STL version of the OpenXY bracket that is used by the OHM to secure the carriage to the rails and allow it to ride smoothly. | 1 |
| 01:42, 11 December 2012 | OpenX arm45 F.STL (file) | |
53 KB | This is an STL version of the OpenX arm used by the OHM to secure the carriage to the rails. | 1 |
| 01:41, 11 December 2012 | Idler.STL (file) | |
126 KB | This is an STL version of the Idler used on the Open Hybrid Mendel. | 1 |
| 01:38, 11 December 2012 | Bens OpenX Dual Carriage.STL (file) | |
154 KB | This is an STL version of Ben Visnesky's OHM Dual Extruder Carriage design. | 1 |
| 06:59, 8 December 2012 | Bens OpenX Dual Carriage.SLDPRT (file) | |
435 KB | The SolidWorks part file for Ben Visnesky's OpenX Dual Extruder Carriage, designed for the Open Hybrid Mendel. | 2 |
| 06:32, 8 December 2012 | OHM Dual Extruder SolidWorks Parts.zip (file) | |
1.55 MB | This is a ZIP file containing the SolidWorks parts files for a complete OHM Dual Extruder. | 1 |
| 06:09, 8 December 2012 | Psu greg-wade hybrid extruder.SLDPRT (file) | |
527 KB | The SolidWorks part file for the PSU Greg's Wade's Open Hybrid Mendel Extruder Body. | 1 |
| 06:08, 8 December 2012 | OpenXY bracket rev1.SLDPRT (file) | |
149 KB | The SolidWorks part file for the OpenXY Bracket, designed for the Open Hybrid Mendel OpenX Carriage. | 1 |
| 06:08, 8 December 2012 | OpenX arm45 F.SLDPRT (file) | |
317 KB | The SolidWorks part file for the OpenX 45 Arm, designed for the Open Hybrid Mendel Wade's Extruder. | 1 |
| 06:07, 8 December 2012 | Idler.SLDPRT (file) | |
452 KB | The SolidWorks part file for the idler, designed for an Open Hybrid Mendel Wade's Extruder. | 1 |
| 06:06, 8 December 2012 | Extruder gear rev4.SLDPRT (file) | |
1.14 MB | The SolidWorks part file for the stepper motor extruder gear. | 1 |
| 05:26, 8 December 2012 | OHM Dual Extruder Assembly Side.jpg (file) |  |
228 KB | This is what a fully assembled OHM dual extruder would look like from the side, with all hardware. | 1 |
| 05:25, 8 December 2012 | OHM Dual Extruder Assembly Bottom.jpg (file) |  |
214 KB | This is what a fully assembled OHM dual extruder would look like (from the bottom), with all the hardware. | 1 |
| 05:24, 8 December 2012 | OHM Dual Extruder Assembly Isometric.jpg (file) |  |
228 KB | This is what a fully assembled OHM dual extruder would look like, with the OpenX Carriage and Hardware. | 1 |
| 05:22, 8 December 2012 | OHM Dual Extrusion MotorToMotor Measurement.jpg (file) |  |
183 KB | This is what a bottom view of a motor to motor configuration of an OHM dual extruder would look like. | 1 |
| 05:21, 8 December 2012 | OHM Dual Extrusion MotorToMotor.jpg (file) |  |
236 KB | This is an isometric view of what a motor to motor configuration of an OHM dual extruder would look like. | 1 |
| 05:20, 8 December 2012 | OHM Dual Extrusion GearToGear Measurement.jpg (file) |  |
184 KB | This is a bottom view of what a gear to gear arrangement of an OHM dual extruder body would look like. | 1 |
| 05:19, 8 December 2012 | OHM Dual Extrusion GearToGear.jpg (file) |  |
212 KB | This is an isometric view of what a Gear to Gear arrangement for an OHM dual extruder would look like. | 1 |
| 05:18, 8 December 2012 | Bens OpenX Dual Carriage Top.jpg (file) |  |
132 KB | This is a top view of Ben Visnesky's Dual Extruder OpenX Carriage. | 1 |
| 05:14, 8 December 2012 | Bens OpenX Dual Carriage Isometric.jpg (file) |  |
197 KB | This is an isometric view of Ben Visnesky's Dual Extruder OpenX Carriage. | 1 |
| 05:12, 8 December 2012 | OHM Single Extruder Isometric.jpg (file) |  |
220 KB | This is a picture depicting a single Open Hybrid Mendel extruder. | 1 |
| 19:56, 9 October 2012 | OHMRodCutDiagram.jpg (file) |  |
189 KB | This is a diagram that depicts how a set of 1 meter rods can be cut to size in order to provide the appropriate parts to assemble an Open Hybrid Mendel. | 1 |
