File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 13:15, 10 August 2015 | Reloaded Bowden 2a.jpg (file) |  |
50 KB | Bottom side showing Bowden connector mount. | 1 |
| 13:12, 10 August 2015 | Reloaded Bowden 1a.jpg (file) |  |
93 KB | Greg's Wade's Geared Extruder Reloaded, Bowden remix by Alberto Valero, November 2012. | 1 |
| 12:51, 9 August 2015 | UGWG extruder Gears 1a.jpg (file) |  |
119 KB | Fishbone gears for the Ultimate Greg's Wade's Geared Extruder, August 2015. | 1 |
| 12:44, 9 August 2015 | UGWG extruder Body 1a.jpg (file) |  |
107 KB | Ultimate Greg's Wade's Geared Extruder, 30mm version, OpenSCAD render. | 1 |
| 10:15, 6 August 2015 | GregFrost Wade Gears.jpg (file) |  |
101 KB | Straight gears for Wade's geared extruder by Greg Frost, december 2010. | 1 |
| 10:02, 6 August 2015 | NCLewis Wade Gears.jpg (file) |  |
86 KB | Straight gears for Wade's geared extruder by Nicholas C. Lewis, october 2010. | 1 |
| 09:49, 6 August 2015 | Stoffel15 Wade Gears.jpg (file) |  |
118 KB | Herringbone aka fishbone gears for Wade's geared extruder by Stoffel15. | 1 |
| 22:11, 22 June 2015 | PRUSA i3 steel 3mm lasercut 2.5DXL e irobri.dwg.zip (file) |  |
85 KB | DWG CAD source file for P3Steel V2.5 DXL (zipped) | 1 |
| 22:05, 22 June 2015 | PRUSA i3 steel 3mm lasercut 2.5DXL e irobri color.jpg (file) |  |
262 KB | P3Steel version 2.5 | 1 |
| 23:10, 7 March 2015 | Misan bobsyouruncle 1b.jpg (file) |  |
103 KB | Misan's version of Greg's Wade's Geared Extruder. | 1 |
| 22:26, 7 March 2015 | GregsGuidler 1b.jpg (file) |  |
90 KB | Wade's Greg's Geared Extruder with a Guidler. And what is a guidler, you may ask? | 1 |
| 20:27, 7 March 2015 | Gregs hinged 1b.jpg (file) |  |
79 KB | Greg's Hinged Accessible Extruder, body and idler. | 1 |
| 20:12, 7 March 2015 | Gregs V1 1b.jpg (file) |  |
73 KB | Greg's accessible extruder, Version 1. | 1 |
| 19:35, 7 March 2015 | GearsGregs 1b.jpg (file) |  |
115 KB | Greg's gears for his Accessible Extruder. Gear ratio is 10:43. | 1 |
| 18:59, 7 March 2015 | GregsWadeV2 1a.jpg (file) |  |
80 KB | Greg's Wade's Accessible Extruder, version 2. | 1 |
| 00:49, 7 March 2015 | Fishbone gears 1a.jpg (file) |  |
122 KB | Greg's Wade's reloaded fishbone gears. | 1 |
| 16:42, 6 March 2015 | Screenshot from 2015-03-06 21-11-09.jpg (file) |  |
85 KB | Cropped. | 2 |
| 15:26, 22 February 2015 | Screenshot OctoPrint.jpg (file) |  |
298 KB | A partial screenshot of OctoPrint running on an OctoGoatBox. | 1 |
| 04:28, 29 January 2015 | Rostock Delta Kinematics 3.pdf (file) |  |
3.19 MB | A simple, clear explanation of the forward and reverse kinematics for linear delta printers, by Steve Graves. | 1 |
| 18:47, 13 January 2015 | Heatbed glass clips 1a.jpg (file) |  |
441 KB | PCB heatbed mounted on P3Steel (Prusa i3 variant) with glass and bulldog clips. | 1 |
| 07:40, 11 January 2015 | A4988 detail current sense r 1a.jpg (file) |  |
369 KB | A4988 clone board 0.1 Ohm current sense resistors detail. | 1 |
| 11:51, 7 January 2015 | Octogoatbox hardware TV Box 1a.jpg (file) |  |
375 KB | Android TV Box assimilated by OctoGoat and converted to OctoGoatBox. | 1 |
| 11:02, 7 January 2015 | Octogoatbox hardware Banana Pi 2a.jpg (file) |  |
465 KB | Power supply (5V@2A) and inexpensive 640x480 USB webcam. | 1 |
| 10:41, 7 January 2015 | Octogoatbox hardware Banana Pi 1a.jpg (file) |  |
548 KB | Banana Pi, WiFi dongle, SD card and Octogoat. | 1 |
| 08:01, 26 December 2014 | ATX cable extension 24 fem to male 3a.jpg (file) |  |
634 KB | Our 24-pin ATX extension cable prepared for use, the remaining lines carry the signals/voltages required to properly connect the ATX PSU to our RAMPS board. | 1 |
| 07:49, 26 December 2014 | ATX cable extension 24 fem to male 2a.jpg (file) |  |
752 KB | The female connector of our 24-pin ATX extension cable plugged into the ATX PSU's male connector, after I yanked out all the lines that are not going to be used. | 1 |
| 06:59, 26 December 2014 | ATX 4to8pin adapter cable 2a.jpg (file) |  |
383 KB | The ATX PSU female 4 pin to male 8 pin adapter cable, prepared for use. I just yanked the cables out of the male end, bunched respectively the +12V and GND lines together, and soldered the ends. | 1 |
| 06:50, 26 December 2014 | ATX 4to8pin adapter cable 1a.jpg (file) |  |
409 KB | The ATX PSU female 4 pin to male 8 pin adapter cable. We only use the female connector. | 1 |
| 06:42, 26 December 2014 | ATX extension adapter cables ready 1a.jpg (file) |  |
486 KB | The pair of cables needed to adapt an ATX PSU for Reprap use, ready for use! | 1 |
| 06:23, 26 December 2014 | ATX extension adapter cables 1a.jpg (file) |  |
621 KB | A pair of cables needed to adapt an ATX PSU for Reprap use. | 1 |
| 12:51, 24 December 2014 | AndrewBCN-X-motor-end-4a.png (file) |  |
12 KB | Prusa i3 X motor end improved by yours truly. | 1 |
| 12:49, 24 December 2014 | AndrewBCN-X-motor-end-3a.png (file) |  |
13 KB | Prusa i3 X motor end improved by yours truly. | 1 |
| 09:40, 22 December 2014 | Stepper drivers mixed a4988 drv8825 RAMPS 1a.jpg (file) |  |
612 KB | Mixing A4988 and DRV8825 stepper drivers on the same RAMPS 1.4? Yes, you can! | 1 |
| 07:31, 21 December 2014 | P3Steel ramps printing 2a.jpg (file) |  |
515 KB | Arduino Mega 2560 + RAMPS 1.4 + 4 x A4988 stepper drivers + 80mm fan stack, during a print. | 1 |
| 07:05, 21 December 2014 | Stepper drivers a4988 drv8825 4a.jpg (file) |  |
467 KB | A4988 and DRV8825 stepper driver boards, underside. | 1 |
| 21:41, 19 December 2014 | Stepper drivers a4988 drv8825 3a.jpg (file) |  |
413 KB | A4988 and DRV8825 stepper driver boards side by side. | 1 |
| 21:07, 19 December 2014 | Inexpensive stepper driver board a4988 1a.jpg (file) |  |
691 KB | An inexpensive "Made in China" Pololu-style stepper driver board based on the popular Allegro 4988 IC. | 1 |
| 20:57, 19 December 2014 | RAMPS 1.4 1b.jpg (file) |  |
535 KB | Inexpensive "Made in China" RAMPS 1.4 board without stepper driver boards. | 1 |
| 14:06, 19 December 2014 | DRV8825 stepper driver module 1a.jpg (file) |  |
461 KB | DRV8825-based inexpensive stepper driver board. | 1 |
| 18:04, 17 December 2014 | P3Steel x-axis motor end 2a.jpg (file) |  |
754 KB | P3Steel Improved X motor end by AndrewBCN. | 1 |
| 17:40, 17 December 2014 | AndrewBCN-X-motor-end-1a.png (file) |  |
11 KB | Reverse-engineered, improved Prusa i3 X motor end by AndrewBCN. | 1 |
| 17:06, 17 December 2014 | P3Steel x-axis motor end 1a.jpg (file) |  |
688 KB | X motor end complete. | 1 |
| 16:48, 17 December 2014 | BQ-X-motor-end-1a.png (file) |  |
8 KB | This is bq's version of the Prusa i3 X motor end for their Prusa i3 Hephestos. | 1 |
| 15:55, 17 December 2014 | Mecan0-X-motor-end-1a.png (file) |  |
13 KB | Mecan0's version of the Prusa i3 X motor end. | 1 |
| 15:42, 17 December 2014 | Misan-Improved-X-motor-end.png (file) |  |
10 KB | Misan's version of the X motor end with a few added cutouts. | 1 |
| 15:14, 17 December 2014 | Misan-X-motor-end.png (file) |  |
10 KB | Misan's improved Prusa i3 X motor end. | 1 |
| 15:04, 17 December 2014 | Josef-Prusa-Vanilla-X-motor-end-1a.png (file) |  |
11 KB | Josef Prusa's original Prusa i3 vanilla X motor end. | 1 |
| 23:54, 13 December 2014 | PRUSA i3 steel 3mm lasercut 2.01d irobri color.jpg (file) |  |
301 KB | For reference only. Low-res drawing of P3Steel version 2.01. | 1 |
| 22:46, 13 December 2014 | P3Steel Y-axis belt holder Lahuerta 1a.jpg (file) |  |
429 KB | Simple Y-axis GT2 Belt Holder for the P3Steel designed by Pedro Lahuerta which is easy to print, easy to install and works very well. | 1 |
| 22:32, 13 December 2014 | P3Steel useless part 1a.jpg (file) |  |
441 KB | Useless part removed in version 2.01 of the P3Steel frame. | 1 |
