User contributions
- 21:04, 27 October 2012 (diff | hist) . . (-4) . . m Rroofl (→Files)
- 21:03, 27 October 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis STLs.zip (uploaded a new version of "File:Rroofl Z-axis STLs.zip": Modifications to the Z-axis bits in response to suggestions from Vik. The changes add stiffness to the assembly and also remove interference between the x-axis belt pulleys and the adjustmen) (current)
- 21:01, 27 October 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis Assembly-Blender257.zip (uploaded a new version of "File:Rroofl Z-axis Assembly-Blender257.zip": Modifications to the top bracket and the bottom bracket of the z-axis to reflect adjustments in switch locations, and greater stiffness for the z-axis assembly.) (current)
- 20:59, 27 October 2012 (diff | hist) . . (0) . . File:AssemblyGuideV3sml.jpg (uploaded a new version of "File:AssemblyGuideV3sml.jpg": Quite a few changes to reflect development suggestions from Vik. Of note, are; The switch holder has been moved to keep the adjustment screw clear of the x-axis belts, the top brackets for ) (current)
- 20:55, 27 October 2012 (diff | hist) . . (+22) . . m Rroofl
- 18:42, 26 September 2012 (diff | hist) . . (0) . . Rroofl (→Files)
- 18:41, 26 September 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis STLs.zip (uploaded a new version of "File:Rroofl Z-axis STLs.zip": Two of the STLs have been changed from the previous edition. These are both of the z-axis base parts. The changes make the two ends have the same pattern and spacing for the bolt and screw)
- 18:39, 26 September 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis Assembly-Blender257.zip (uploaded a new version of "File:Rroofl Z-axis Assembly-Blender257.zip": The z-axis base ends have been modified to have the same bolt hole pattern and spacing and the clearance between the z-axis frame and the big gear has been enlarged.)
- 18:35, 26 September 2012 (diff | hist) . . (0) . . File:AssemblyGuideV3sml.jpg (uploaded a new version of "File:AssemblyGuideV3sml.jpg": Yeah OK, I just uploaded the wrong one. Try this instead)
- 18:33, 26 September 2012 (diff | hist) . . (0) . . File:AssemblyGuideV3sml.jpg (uploaded a new version of "File:AssemblyGuideV3sml.jpg": Images changed to reflect the increased clearance between the z-axis drive support and the big gear and changes to the z-axis support base idler end so that the holes match the driven end.)
- 20:43, 23 September 2012 (diff | hist) . . (-50) . . m Rroofl (→Files)
- 20:41, 23 September 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis STLs.zip (uploaded a new version of "File:Rroofl Z-axis STLs.zip": This edition included updated versions of the Z-axis printable components. The z-axis drive location has been shifted and many holes resized to allow a better fit.)
- 20:39, 23 September 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis Assembly-Blender257.zip (uploaded a new version of "File:Rroofl Z-axis Assembly-Blender257.zip": This edition has major changes to the z-axis drive base to sort out binding issues. Also most holes are slightly larger to allow easier fitting and less work with a drill.)
- 20:37, 23 September 2012 (diff | hist) . . (0) . . File:AssemblyGuideV3sml.jpg (uploaded a new version of "File:AssemblyGuideV3sml.jpg": Z-Axis Assembly showing redesigned arrangement for the boot end drives. This arrangement should stop the binding that was occurring in the original arrangement.)
- 01:35, 15 September 2012 (diff | hist) . . (+1,080) . . User:BouncyMonkey (current)
- 01:15, 15 September 2012 (diff | hist) . . (+574) . . N User:BouncyMonkey (Created page with 'BouncyMonkey is the avatar name for Hamish Trolove, an Engineer at heart and by training. While he does not need another 3D printer (we have an Ultimaker) he was pleased to get …')
- 01:09, 15 September 2012 (diff | hist) . . (-2) . . Rroofl
- 01:06, 15 September 2012 (diff | hist) . . (+99) . . N File:AssemblyGuideV3sml.jpg (A new guide to the Z-Axis developments. This image is to help identify the relevant STL for users.)
- 01:04, 15 September 2012 (diff | hist) . . (0) . . Rroofl
- 01:00, 15 September 2012 (diff | hist) . . (+313) . . m Rroofl (→Files)
- 00:50, 15 September 2012 (diff | hist) . . (+225) . . N File:Rroofl Z-axis Assembly-Blender257.zip (This is a single Blender file containing all of the development models for the Rroofle Z-axis. It also includes other components so that it can all be made to line up properly. If we're lucky it may even be able to be made.)
- 00:47, 15 September 2012 (diff | hist) . . (0) . . File:Rroofl Z-axis STLs.zip (uploaded a new version of "File:Rroofl Z-axis STLs.zip": The Zaxis assembly has been rejigged to make assembly easier and also enable Vik to use him Mallet more effectively when installing bearings. A limit switch fitting option has been added.)
- 15:19, 12 September 2012 (diff | hist) . . (+985) . . Rroofl
- 01:48, 7 September 2012 (diff | hist) . . (0) . . File:Rroofl Dev Zaxisbits.jpg (uploaded a new version of "File:Rroofl Dev Zaxisbits.jpg": A slightly smaller version of the file, so as not to dominate the page) (current)
- 01:46, 7 September 2012 (diff | hist) . . (+525) . . Rroofl
- 01:26, 7 September 2012 (diff | hist) . . (+43) . . N File:Rroofl Z-axis STLs.zip (The STLs for the Rroofl Z-axis development.)
- 01:26, 7 September 2012 (diff | hist) . . (+170) . . N File:Rroofl Z-axis Blender files.zip (Models used to develop the Rroofl Z-axis and Cross Slide bits. Also includes assembly model. All files for Blender 2.63. Older versions will not handle these properly.) (current)
- 01:19, 7 September 2012 (diff | hist) . . (+76) . . N File:Rroofl Dev Zaxisbits.jpg (This is a guide to the files developed for the z-axis and cross slide drive.)