RUG/Pennsylvania/State College/Printers/PSU Unit Black

From RepRap
Jump to: navigation, search
20131205 185748.jpg
Black small.png
Black
Color: Black
Extruder: .35mm
Temperature: 220C
Design: Open Hybrid Mendel
Electronics: RAMPS
Firmware: Marlin
Operation Status: Thumb down.png




Introduction

This is the page for the State College Rep Rap User Group's (SCRUG)Black 3D printer. The printer was developed and assembled by students in Penn State's Engineering Design 497J course and members of the 3D printing club. Our goal is to continuously tweak the printer until it is ready for distribution and sale to other departments in the University and local schools and businesses. This particular printer was transferred to Penn State's Material Science (MatSE) Department

This printer is mainly comprised of black frame pieces with a few green pieces mixed in. On the board Black is labeled as Black and Green.



Log

Date Modification / Problem
02/05/2014 X-axis a little bit off.
12/05/2013 Waiting on working RAMPS. Should be functioning soon.
12/02/2013 Printer is assigned to be the Demo Printer. Should not be removed from the cart.
Unknown Quick-leveling Bed Thumbwheels
Unknown Maximized Print Bed
Unknown Spool Holder
Unknown Converted to RAMPS electronics
Unknown Aligned the x-axis
Unknown wire/make the extruder
Unknown Flash arduino board

Gallery

Operation

<videoflash type="youtube">NrnnGxAKKhM?hd=1</videoflash> <videoflash type="youtube">ihorym9Zc4k?hd=1</videoflash> <videoflash type="youtube">dXi6hgUPAG4?hd=1</videoflash>

Build Progress

This section includes the progress the build team has made on the black printer. Final Update

Black1.JPG

Things that still need to be done:

1. Finish assembling the extruder

2. Finish assembling the x-axis and z-axis

2. Solder the thermocouple junction onto the electronics board

3. Connect all wires to the electronics board

4. Organize the wires so they will not be in the way while printing

5. Test. This printer has not been connected to a computer yet

PSU Unit Black - Current Condition



Products

Pickchu.jpg Chessrook.jpg Batman-black printer.jpg Phlask.jpg Perfume bottle.jpg One piece.jpg

State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg