File:Stepper driver overheat glitch.jpg

From RepRap
Jump to: navigation, search
Original file ‎(1,183 × 1,217 pixels, file size: 235 KB, MIME type: image/jpeg)

Here is a the 10mm cube that printed when the Stepper Driver was overheating. As you can see it would miss some step which would mean over time the start point for the next layer would move.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:42, 3 October 2008Thumbnail for version as of 12:42, 3 October 20081,183 × 1,217 (235 KB)Ronanwarrior (talk | contribs)Here is a the 10mm cube that printed when the Stepper Driver was overheating. As you can see it would miss some step which would mean over time the start point for the next layer would move.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon PowerShot A650 IS
Exposure time1/60 sec (0.016666666666667)
F Numberf/2.8
ISO speed rating125
Date and time of data generation05:21, 25 August 2008
Lens focal length7.4 mm
OrientationNormal
Horizontal resolution180 dpi
Vertical resolution180 dpi
Software usedMicrosoft Windows Photo Gallery 6.0.6000.16386
File change date and time09:39, 3 October 2008
Y and C positioningCentered
Exif version2.2
Date and time of digitizing05:21, 25 August 2008
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode5
APEX shutter speed5.90625
APEX aperture2.96875
APEX exposure bias0
Maximum land aperture2.96875 APEX (f/2.8)
Metering modePattern
FlashFlash did not fire, auto mode
Unique image ID6FEF868AB0064B04B41BCB110F2AC203
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Stepper_driver_overheat_glitch.jpg&oldid=479"