File:QG MPM 3d Printer.jpeg

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	HUAWEI
Camera model	JSN-L21
Exposure time	7/100 sec (0.07)
F Number	f/1.8
ISO speed rating	1,000
Date and time of data generation	11:21, 5 April 2020
Lens focal length	3.88 mm
Latitude	45° 4′ 33.48″ N
Longitude	7° 23′ 40.61″ E
Altitude	0 meters above sea level
Width	2,976 px
Height	3,968 px
Bits per component	8 8 8
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	JSN-L21 10.0.0.175(C432E5R1P3)
File change date and time	11:21, 5 April 2020
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.1
Date and time of digitizing	11:21, 5 April 2020
Meaning of each component	Y Cb Cr does not exist
Image compression mode	0.95
APEX shutter speed	29.8973
APEX aperture	1.69
APEX brightness	0
APEX exposure bias	0
Maximum land aperture	1.69 APEX (f/1.8)
Metering mode	Pattern
Light source	Daylight
Flash	Flash did not fire
DateTime subseconds	130,555
DateTimeOriginal subseconds	130,555
DateTimeDigitized subseconds	130,555
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Custom process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	27 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS time (atomic clock)	09:21
GPS date	5 April 2020
GPS tag version	2.2.0.0