File:PrintrbotSimpleMEtalPRoByJamesVilleneuve.JPG

From RepRap
Jump to: navigation, search
Original file ‎(801 × 693 pixels, file size: 168 KB, MIME type: image/jpeg)

draft of pinout to daughter extruder board

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:18, 30 May 2019Thumbnail for version as of 01:18, 30 May 2019801 × 693 (168 KB)Jamesdanielv (talk | contribs)adding in pin data
01:16, 30 May 2019Thumbnail for version as of 01:16, 30 May 2019801 × 693 (168 KB)Jamesdanielv (talk | contribs)added some define pins
00:14, 30 May 2019Thumbnail for version as of 00:14, 30 May 2019801 × 693 (168 KB)Jamesdanielv (talk | contribs)added thermistor wires
22:06, 29 May 2019Thumbnail for version as of 22:06, 29 May 2019801 × 693 (166 KB)Jamesdanielv (talk | contribs)draft of pinout to daughter extruder board
  • You cannot overwrite this file.

The following file is a duplicate of this file (more details):

There are no pages that link to this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerApple
Camera modeliPhone 6s Plus
Exposure time1/60 sec (0.016666666666667)
F Numberf/2.2
ISO speed rating32
Date and time of data generation20:12, 9 May 2019
Lens focal length4.15 mm
Latitude44° 50′ 49.27″ N
Longitude123° 11′ 29.31″ W
Altitude52.67 meters above sea level
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software used12.1.4
File change date and time20:12, 9 May 2019
Exposure ProgramNormal program
Exif version2.21
Date and time of digitizing20:12, 9 May 2019
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
APEX shutter speed5.9070351758794
APEX aperture2.2750072907553
APEX brightness5.9088206144698
APEX exposure bias0
Metering modePattern
FlashFlash did not fire, auto mode
DateTimeOriginal subseconds751
DateTimeDigitized subseconds751
Supported Flashpix version0,100
Color spacesRGB
Sensing methodOne-chip color area sensor
Scene typeA directly photographed image
Exposure modeAuto exposure
White balanceAuto white balance
Focal length in 35 mm film29 mm
Scene capture typeStandard
GPS time (atomic clock)03:12
Speed unitKilometers per hour
Speed of GPS receiver0
Reference for direction of imageTrue direction
Direction of image95.860619469027
Reference for bearing of destinationTrue direction
Bearing of destination95.860619469027
GPS date10 May 2019
IIM version2
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:PrintrbotSimpleMEtalPRoByJamesVilleneuve.JPG&oldid=185585"