File:Etched and ready.JPG

From RepRap
Jump to: navigation, search
Original file ‎(3,888 × 2,592 pixels, file size: 2.49 MB, MIME type: image/jpeg)

Toner Transfer Method/Building my own Heatbed

Now the board is etched in iron(III)chloride and the toner was removed with acetone.

Resistance measured: 2.1 Ohm

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:24, 30 June 2013Thumbnail for version as of 17:24, 30 June 20133,888 × 2,592 (2.49 MB)RobertKuhlmann (talk | contribs)'''Toner Transfer Method/Building my own Heatbed''' Now the board is etched in iron(III)chloride and the toner was removed with acetone. Resistance measured: 2.1 Ohm
  • You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon EOS 40D
Exposure time1/60 sec (0.016666666666667)
F Numberf/5.6
ISO speed rating400
Date and time of data generation22:50, 30 June 2013
Lens focal length85 mm
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
File change date and time22:50, 30 June 2013
Y and C positioningCo-sited
Exposure ProgramNormal program
Exif version2.21
Date and time of digitizing22:50, 30 June 2013
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
APEX shutter speed6
APEX aperture5
APEX exposure bias-0.33333333333333
Metering modePattern
FlashFlash fired, compulsory flash firing
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Etched_and_ready.JPG&oldid=96991"