File:Caveat inertial mass.jpg
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 1,280 × 960 pixels.
Original file (1,280 × 960 pixels, file size: 394 KB, MIME type: image/jpeg)
These gears were both printed from exactly the same gcode, "all other things equal", at 25 mm/s. The one on the left shows obvious lost steps on the y axis. The only difference was the addition of a 110x110mm aluminium plate (pictured above) to have a full build platform. The additional swinging mass proved too much for the wimpy y-axis stepper.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 06:26, 3 August 2011 | | 1,280 × 960 (394 KB) | Lanthan (talk | contribs) | These gears were both printed from exactly the same gcode, "all other things equal", at 25 mm/s. The one on the left shows obvious lost steps on the y axis. The only difference was the addition of an 10x110mm aluminium plate (pictured above) to have a ful |
- You cannot overwrite this file.
File usage
The following page links to this file:
