Vik's Mendel X & Z interface Bracket
Revision as of 18:46, 18 May 2010 by VikOlliver (talk | contribs)
Release status: unknown
| Description | A simplified OpenScad Mendel X/Y interface design
|
| License | unknown
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
This bracket combines all 11 parts for an X axis end piece and Z axis nut holder into just 3 parts requiring no bearings and only 6 screws to assemble. Two M8 nuts are used with internal printed anti-backlash springs to attach the Z drive rods. The limit sensor is glued to the face of the bracket, pointing at the X Carriage.
Work in Progress
See Thingiverse Thing #1825 for instructions and download
