User:Dud201/Blog

From RepRap
< User:Dud201
Revision as of 15:31, 4 November 2014 by Dud201 (talk | contribs)
Jump to: navigation, search

09/04/14

We learned how to make configurations to run the printing process.

09/09/14

We were assigned in teams, in my case team 5.

09/11/14

09/16/14

09/18/14

09/23/14

09/25/14

09/30/14

10/02/14

10/07/14

10/09/14

Prof Mike told me about the

10/14/14

I took some measurements of the fan and pass it to a SolidWorks file.

10/16/14

I made in Solidworks, using a base of the nozzle founded in the Reprap website, a support for a fan. It ended up not being useful because the position of the fan was in one of the axis of the printer.

10/21/14

I talk to Ian and was looking for options to make a printer, fixing one of the oldest one. I decided to work with the printer Black.

10/23/14

10/28/14

I tried to work with the printer Black. I identified a few problems like one of the z axis is broken, it need a new nozzle and some balance ( put the same distance between all the axis).

10/30/14

I started to work in the new base to put a new nozzle in the printer Black. Ian gave me a file he have for a new base with a hole in the bottom, to fit the new nozzle. I edited the file and also tried to manually work or older bases we had in the lab to try to make a hole.

11/04/14