User:Darque/Projects/DarquenedPrusa

From RepRap
< User:Darque‎ | Projects
Revision as of 22:27, 6 February 2015 by Darque (talk | contribs)
Jump to: navigation, search

Scope

This is a log of my experiences in a first printer build. After looking at the various developments I settled on the Prusa i3 as a good starting point because:

  • Simple, well tested design with active development
  • Good build instructions
  • Plenty of support & community knowledge

Planning Links

I did a lot of reading on the Wiki, Forums, GitHub and others before I made a choice. There is a lot of variation in designs so I wanted to ensure I chose something stable for my first build. I considered the timber frame initially and a possible repStrap pathway but as I utilise a lot of aluminium components through work and I need a working printer before I could get more adventurous I chose the single aluminium frame Prusa i3 quite early on in my research

BOM