Toaster Oven Reflow Technique
Revision as of 08:39, 6 December 2011 by Adrianbowyer (talk | contribs)
See also HotplateReflowTechnique.
Contents
Introduction
This page describes how to reflow solder surface mount printed circuits using a cheap toaster oven. It owes a great deal to Nophead's Cooking with Hydraraptor blog post.
Equipment
The toaster oven we use is this 900W one from Argos in the UK. It costs £25.
You will also need an Arduino to control it. Just about any Arduino will do; we use the Arduino Diecimila, because we happened to have a few lying about.
Control
Firmware
Video
<videoflash type="vimeo">33188183</videoflash>