Teensylu

From RepRap
Revision as of 00:31, 2 May 2011 by StephS (talk | contribs)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
Teensylu

Release status: Concept

Teensylu-Top.jpg
Description
Design Version 0.6
License
unknown
Author
Contributors
Based-on
Categories
CAD Models
Eagle
External Link


Introduction

This is a project that is based on Sanguinololu. The ATmega644P has been replaced with an Atmel AT90USB1286 MCU. This Microcontroller has on-chip USB, removing the need for the FTDI USB UART. All of the through hole resistors and capacitors have been replaced with 0805 SMT components (as of Ver 0.1). Like the Sanguinololu the Teensylu has expansion headers supporting I2C, SPI, UART, and ADC pins. All extra I/O ports of the AT90USB have been broken out to headers for prototyping.

The Teensylu adds new features like enable pins for each motor (to save power), and a 4th stop called E-Stop to be used as an emergency stop, or extruder stop (to be added in firmware).

Board Images

Teensylu-Top.jpg

Teensylu-Bottom.jpg