Stepper Motor Driver 2.1
Contents
Depreciated. Use Stepper Motor Driver v2.3 instead.
Stepper Motor Driver v2.1
This board design aimed to solve the problems of the Stepper Motor Driver v2.0, as well as offer some unique improvements of its own. The fundamental change was a switch from the A3977 to the Allegro A3979 which is pin-compatible, but offered much higher step resolution, up to 1/16th stepping. Unfortunately the chip was only offered in the TSSOP package, which is a super tiny SMT part. After weeks of fighting with the routing of traces, and issues of trace width, copper thickness, etc., the A3979 chip was abandoned.
You can access the design files on Sourceforge.
The board was never actually produced, as work was started in favor of the Stepper Motor Driver v2.2 design.
History
Changelog
- Switched to the A3979 from the A3977.
- Moved to an almost entirely SMT design.
- Hacked on all sorts of stuff to get it working nicely.
Previous Versions
- A complete redesign of the Stepper Motor Driver v2.0
- Which was an even more complete redesign of the old Stepper Motor Driver v1.2
