All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 17:17, 8 January 2012 Lanthan (talk | contribs) uploaded File:Loose x pulley printing.jpg (Printing with a loose pulley? this is what it looks like. First signs can be way less obvious.)
- 16:46, 8 January 2012 Lanthan (talk | contribs) uploaded File:Full crossbrace.jpg (A crossbracing subsystem for the Prusa Mendel and similar. Files are here: http://www.thingiverse.com/thing:15606)
- 16:37, 8 January 2012 Lanthan (talk | contribs) uploaded File:Torsion box y motor mount.jpg (Picture of the working assembly. Files are here: http://www.thingiverse.com/thing:11017)
- 16:47, 28 August 2011 Lanthan (talk | contribs) uploaded File:Woodsmoke labyrinth.ods (The spreadsheet I use to check backlash using Woodsmoke's Lashmaze)
- 12:03, 26 August 2011 Lanthan (talk | contribs) uploaded File:Smooth rod collar.jpg (== Smooth rod failsfe collar/clamp from an M8 nut == * you'll need a stationary drill (drill press), a center punch, 8mm and 2.5 mm drills, an M3 tap, M8 nuts, m3x6 (or similar) bolts * drill out the nut's center and apply 5-20 circular file strokes unt)
- 07:37, 25 August 2011 Lanthan (talk | contribs) uploaded File:Torsion box y mount.jpg (An attempt to improve the Y motor mount and generally get a stiffer, more reliable simplified Mendel)
- 04:42, 16 August 2011 Lanthan (talk | contribs) uploaded File:Prusamendel mag x carriage2.jpg (Vitamin-rich heat resistant, magnetic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by Lanthan, August 2011.)
- 04:41, 16 August 2011 Lanthan (talk | contribs) uploaded File:Prusamendel mag x carriage.jpg (Vitamin-rich heat resistant, magnetic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by Lanthan, August 2011. )
- 04:01, 16 August 2011 Lanthan (talk | contribs) uploaded File:Inverted belt idler.jpg (A Nophead's idea published in his blog: http://hydraraptor.blogspot.com/2011/06/half-belt-hack.html Implemented here for a Prusa Mendel X axis. Works perfectly for Y axis too. Allows for smoother operation and re-use of comparatively short belt bits.)
- 07:00, 15 August 2011 Lanthan (talk | contribs) uploaded File:Microsw holder 02.jpg (Microswitch holder with 10 mm spacing between M2 holes. Mod of the Prusa Mendel Openscad file.)
- 06:57, 15 August 2011 Lanthan (talk | contribs) uploaded File:X reinforced 3.jpg (Shaft collars for the X axis. Vitamin prepared and used by Lanthan, August 2011)
- 06:22, 15 August 2011 Lanthan (talk | contribs) uploaded File:Endstop-holder microsw.scad (Openscad file for a Mendel / Prusa Mendel microswitch holder. 10 mm spacing between M2 holes.)
- 06:01, 15 August 2011 Lanthan (talk | contribs) uploaded File:Prusamendel finished.jpg (Lanthan's Prusa Mendel interpretation. Mechanical build completed August 2011)
- 05:45, 15 August 2011 Lanthan (talk | contribs) uploaded File:Benchtop router.jpg (Largish (400 x 600 mm) benchtop router used in a bootstrap process.)
- 06:26, 3 August 2011 Lanthan (talk | contribs) uploaded File:Caveat inertial mass.jpg (These gears were both printed from exactly the same gcode, "all other things equal", at 25 mm/s. The one on the left shows obvious lost steps on the y axis. The only difference was the addition of an 10x110mm aluminium plate (pictured above) to have a ful)
- 05:49, 28 July 2011 Lanthan (talk | contribs) uploaded File:Lanthans cupcake 03s.jpg (Documenting the finished build)
- 05:47, 28 July 2011 Lanthan (talk | contribs) uploaded File:Lanthans cupcake 04s.jpg (Documenting the finished build)
- 19:14, 27 July 2011 Lanthan (talk | contribs) uploaded File:Lanthans cupcake.jpg (Lanthan's cupcakestrap, started in 2010, finished summer 2011. Reproducing a Prusa.)
- 08:23, 25 July 2011 Lanthan (talk | contribs) uploaded File:Tonokip firmware working with ramps and cupcakestrap.zip (A june 2011 snapshot of Tonokip (now Sprinter) firmware proven to work correctly with RAMPS 1.2 and a cupcakestrap. )
- 08:13, 25 July 2011 Lanthan (talk | contribs) uploaded File:Cupcakestrap for ramps tonokip configuration.h (Working configuration.h file for June 2011 Tonokip firmware, RAMPS 1.2, 16x microstepping on all four axes and a "cupcakestrap" with Acme screws on Z axis.)
- 07:45, 25 July 2011 Lanthan (talk | contribs) uploaded File:Commissionned heatbed 04s.jpg (pcb-milled heatbed on a cupcakestrap (printing parts for a Prusa))
- 16:33, 20 July 2011 Lanthan (talk | contribs) uploaded File:Milled heatbed for cupcake 02s.jpg (Heated build plate for pirated cupcake after some reality check. Total resistance: 2 Ohms)
- 16:30, 20 July 2011 Lanthan (talk | contribs) uploaded File:Milled heatbed for cupcake 01s.jpg (A heated build plate for a pirated cupcake, just out of the mill)
- 15:28, 20 July 2011 Lanthan (talk | contribs) uploaded File:Routerized cupcake gcode.zip (Routerized cupcake (gcode files for a 4060 router cutting 6.7 mm plywood))
- 15:26, 20 July 2011 Lanthan (talk | contribs) uploaded File:Routerized cupcake.zip (Routerized cupcake dxf files (adapted for 6.7 mm plywood) )
- 09:27, 20 July 2011 Lanthan (talk | contribs) uploaded a new version of File:Trace resistance.ods (Erased: error in milling depth used.)
- 08:47, 20 July 2011 Lanthan (talk | contribs) uploaded File:Trace resistance.ods (A spreadsheet to calculate trace resistance from length, width and estimated copper thickness. )
- 15:00, 16 July 2011 Lanthan (talk | contribs) uploaded File:Basic indexer for hobbing.jpg (Basic setup for bolt hobbing. http://www.thingiverse.com/thing:10110)
- 14:47, 16 July 2011 Lanthan (talk | contribs) uploaded File:Early failure s.jpg (Dremelled M8 x8 bolt indexed with 16 cuts - excellent grip, but early failure after less than 10 hours of printing. 15 to 12 cuts might yield better results.)
- 07:40, 11 December 2010 Lanthan (talk | contribs) uploaded File:Milling pcbs 06 detail.jpg (Detail of pcb milling done on a tabletop cnc. 60 degrees cheap carbide v-bit with 0.2 mm flat end. Right: milled at 0.2 mm depth. Left: milled at 0.1 mm depth.)
- 07:38, 11 December 2010 Lanthan (talk | contribs) uploaded File:Milling pcbs 06.jpg (Example of pcb milling done on a tabletop cnc. 60 degrees cheap carbide v-bit with 0.2 mm flat end. Right: milled at 0.2 mm depth. Left: milled at 0.1 mm depth.)
- 07:32, 11 December 2010 Lanthan (talk | contribs) uploaded File:Milling pcbs 05.jpg (Example of pcb milling made on a tabletop cnc (the circuit is an H-bridge))
- 07:30, 11 December 2010 Lanthan (talk | contribs) uploaded File:Milling pcbs 01.jpg (Example of pcb milling (tabletop mill))
- 07:23, 11 December 2010 Lanthan (talk | contribs) uploaded File:Milling pcbs 01 detail.jpg (Copper plate milling with gEDA/pcb -> gerber and excellon files -> pcb2gcode -> EMC2/Axis. 60 degrees v-bit with 0.2 mm flat end. Milling at 0.1 mm (still to deep. epoxy-glass board.)
- 20:13, 23 October 2010 Lanthan (talk | contribs) uploaded File:Trace isolation voronoi pcb2gcode.png (code generated by pcb2gcode interpreted by emc2)
- 20:11, 23 October 2010 Lanthan (talk | contribs) uploaded File:Outp1.png (Example output generated by pcb2gcode (trace isolation Voronoi regions for a Generation 7 opto-endstop))
- 20:07, 23 October 2010 Lanthan (talk | contribs) uploaded File:Outp0.png (Example of one of the outputs generated by pcb2gcode (generation 7 electronics opto-endstop))
- 19:36, 23 October 2010 User account Lanthan (talk | contribs) was created