All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 02:30, 24 November 2016 Aegidius (talk | contribs) uploaded a new version of File:Pandora overall.jpg (Reverted to version as of 06:25, 24 November 2016)
- 02:29, 24 November 2016 Aegidius (talk | contribs) uploaded a new version of File:Pandora overall.jpg
- 02:25, 24 November 2016 Aegidius (talk | contribs) uploaded File:Pandora overall.jpg (Overall view showing bracket for filament reel and power supply.)
- 02:09, 24 November 2016 Aegidius (talk | contribs) uploaded File:Print overhang test.jpg (Printing an overhang test piece on the glass bed. The IR Z-probe can be seen.)
- 01:37, 24 November 2016 Aegidius (talk | contribs) uploaded File:Silicone heaters 2.jpg (Heat plate mounted on bed frame, resting on balsa strips for insulation.)
- 22:11, 23 November 2016 Aegidius (talk | contribs) uploaded File:Silicone heaters 1.jpg (240V Silicone heaters mounted on one of the four heat plates.)
- 03:45, 5 September 2016 Aegidius (talk | contribs) uploaded File:Pandora first print 2.jpg (Printing a snowflake.)
- 03:44, 5 September 2016 Aegidius (talk | contribs) uploaded File:Pandora first print.jpg (Printing a snowflake.)
- 23:05, 2 August 2016 Aegidius (talk | contribs) uploaded File:Rambo board.jpg (Rambo board in enclosure.)
- 20:49, 2 August 2016 Aegidius (talk | contribs) uploaded File:Counterweight pulleys.jpg (Pulley block for counterweight.)
- 20:39, 2 August 2016 Aegidius (talk | contribs) uploaded File:Idler rollers.jpg (Idler rollers for CoreXY belts.)
- 20:37, 2 August 2016 Aegidius (talk | contribs) uploaded File:Zaxis motor.jpg (The parts for the top bearing for the driven leadscrew (with Mena17 motor))
- 20:36, 2 August 2016 Aegidius (talk | contribs) uploaded File:Zaxis idler.jpg (The parts for the top bearing for the Z-axis leadscrew.)
- 20:35, 2 August 2016 Aegidius (talk | contribs) uploaded File:Zaxis home pos.jpg (The bed is homed (as shown by the LED on the endstop switch))
- 02:37, 4 June 2016 Aegidius (talk | contribs) uploaded File:Carriage with belts.jpg
- 02:37, 4 June 2016 Aegidius (talk | contribs) uploaded File:Carriage with belts and motor.jpg
- 02:36, 4 June 2016 Aegidius (talk | contribs) uploaded File:Carriage parts.jpg
- 01:57, 24 May 2016 Aegidius (talk | contribs) uploaded File:Rollers.jpg (Idler rollers on corner bracket, mounted on top frame.)
- 01:56, 24 May 2016 Aegidius (talk | contribs) uploaded File:Overall frame.jpg (Overall view of frame, with tension cables on three sides. The front is left open.)
- 01:55, 24 May 2016 Aegidius (talk | contribs) uploaded File:Motor plate low.jpg (Nema23 motor plate for low belt.)
- 01:54, 24 May 2016 Aegidius (talk | contribs) uploaded File:Motor plate high 2.jpg (Nema23 motor plate for high belt, mounted up on spacers.)
- 01:53, 24 May 2016 Aegidius (talk | contribs) uploaded File:Gantry plate 3.jpg (Gantry plate with angle connector.)
- 01:53, 24 May 2016 Aegidius (talk | contribs) uploaded File:Gantry plate 2.jpg (Gantry plate with angle connector bracing it.)
- 01:52, 24 May 2016 Aegidius (talk | contribs) uploaded File:Gantry plate 1.jpg (Plate at end of gantry. Two rollers have eccentric spacers allowing fine adjustment.)
- 01:51, 24 May 2016 Aegidius (talk | contribs) uploaded a new version of File:Frame.jpg (Reverted to version as of 19:27, 16 August 2010)
- 01:51, 24 May 2016 Aegidius (talk | contribs) uploaded a new version of File:Frame.jpg (Overall view of frame, with crossed tension cables on three sides. The front is left open for accessibiliity.)
- 01:50, 24 May 2016 Aegidius (talk | contribs) uploaded File:Corner.jpg (Top corner plate showing two idler wheels for the CoreXY belts, and one end of the gantry.)
- 01:49, 24 May 2016 Aegidius (talk | contribs) uploaded File:Corner plate.jpg (This corner plate is sold to help build square-section steel shelving. It just happens to be a perfect fit for 20mm square V-slot. There is even a little hole for the tension cable end!)
- 01:47, 24 May 2016 Aegidius (talk | contribs) uploaded File:Corner plate 2.jpg (Corner plate in place at top of frame. Note swaged stainless-steel cable end.)
- 01:45, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bottle screw.jpg (The bottle screw used to tension up the cables and hold the frame square. These parts are stainless-steel cables etc. used in balustrades.)
- 01:44, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bed leadscrew notch.jpg (Another view of the corner of the bed frame. The notch will allow the bed to be easily lifted clear of the leadscrew.)
- 01:42, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bed frame.jpg (Overall picture of bed frame.)
- 01:42, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bed corner wheel.jpg (Wheel at corner of bed, engaged with the V-slot leg.)
- 01:41, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bed 2.jpg (Bed sitting in frame.)
- 01:40, 24 May 2016 Aegidius (talk | contribs) uploaded File:Bed 1.jpg (Bed sitting in frame. The leadscrews are not in place yet.)
- 06:12, 13 May 2016 Aegidius (talk | contribs) uploaded File:Top frame.jpg (Top frame with gantry in place. V-slots are 1000mm by 700mm.)