File list

Jump to: navigation, search

This special page shows all uploaded files.

File list
 
Date Name Thumbnail Size Description Versions
06:39, 22 May 2011 2 holes in a bolt.png (file) 721 KB Wade extruder bolt, filed and hobbed at 2 locations, as provided in my TechZone Huxley kit. 1
07:01, 22 May 2011 Lasercut gear non centered hex hole.png (file) 1.12 MB The big extruder lasercut gear as provided by Techzone in their Huxley kit. Note the little "washer" with an hex hole was glued a bit aside regarding the gear round center hole. 1
07:29, 22 May 2011 Mounting extruder gear with extra washers.png (file) 1.15 MB Added some washers between the gear and the support so that the filament path is aligned with the filed and hobbed hole on the bolt. 1
07:42, 22 May 2011 Extruder gear not round turning.avi (file) 2.33 MB Test run of my extruder gear prior fixing. Note on the right the outer circle of the gear moving up and down while it turns. 1
08:29, 22 May 2011 Washer separated from gear.png (file) 694 KB After 10 minutes of solvent and knife actions, taddaa ! Nearly clean separation of the 2 pieces forming the big lasercut gear of my Techzone Huxley extruder. Although a bit of sanding might be enough, to be sure to work on plane surfaces, I'll do the plac 1
08:42, 22 May 2011 Lasercut huxley gear reassembled.png (file) 1.21 MB Here's the result of re-centering the washer on the gear. Used some little wood screws to replace the nail as I had nothing so tiny to hammer in. 1
10:28, 9 March 2017 No image available.png (file) 5 KB Reverted to version as of 14:19, 30 May 2013 12