User contributions
- 20:35, 1 October 2022 (diff | hist) . . (+44) . . G-code (→M206: Offset axes)
- 14:24, 27 September 2022 (diff | hist) . . (+72) . . G-code (→M206: Offset axes: add reading offsets with M206)
- 14:18, 27 September 2022 (diff | hist) . . (+211) . . Configuring Marlin Bed Dimensions (→Method 2) (current)
- 17:34, 8 July 2014 (diff | hist) . . (-2) . . PID Tuning (→Modifying Marlin Autotune parameters: fix diff ratios between Marlin comments and ZN schemes)
- 17:09, 8 July 2014 (diff | hist) . . (+1,226) . . PID Tuning (→Modifying Marlin Autotune parameters)
- 09:57, 11 June 2014 (diff | hist) . . (+597) . . Talk:Thermistor (→Does anyone ever use the Rz value?) (current)
- 14:33, 22 May 2014 (diff | hist) . . (+86) . . G-code (→M301: Set PID parameters - Hot End: distinguish between Marlin and others.)
- 14:26, 22 May 2014 (diff | hist) . . (+104) . . G-code (→M304: Set PID parameters - Bed)
- 11:35, 15 May 2014 (diff | hist) . . (+214) . . N MetallicaRap (Add a redirect for people looking for MetalicaRap but who spell it like the band http://www.metallica.com/) (current)
- 13:19, 13 May 2014 (diff | hist) . . (+43) . . Extruder Nozzle Variations (Add link to J_Head_Nozzle) (current)
- 12:41, 13 May 2014 (diff | hist) . . (+138) . . Extruder Nozzle Variations (Add link to Nophead's_Extruder_Tweaks)
- 13:04, 12 May 2014 (diff | hist) . . (+99) . . Protected Mosfet (Add SevenSwitch)
- 12:32, 12 May 2014 (diff | hist) . . (+53) . . Protected Mosfet (Update and Add gen7 links)
- 23:02, 11 May 2014 (diff | hist) . . (+3) . . Mechanical Endstop (→Limitations of mechanical switches)
- 12:32, 8 May 2014 (diff | hist) . . (+17) . . About (→Also See: de-orphan Background)
- 12:30, 8 May 2014 (diff | hist) . . (+21) . . Beltruder (→Belt-driven extruder for use with Prusa/Mendel.)
- 12:27, 8 May 2014 (diff | hist) . . (0) . . Comparison of Electronics (typo)
- 00:00, 8 May 2014 (diff | hist) . . (+27) . . Thermistor (→Troubleshooting)
- 23:58, 7 May 2014 (diff | hist) . . (+1,021) . . Thermistor (Add Troubleshooting section.)
- 17:42, 1 May 2014 (diff | hist) . . (+293) . . PLA (→Extrusion width)
- 14:24, 1 May 2014 (diff | hist) . . (+248) . . Filament (→G Code control of filament)
- 14:18, 1 May 2014 (diff | hist) . . (+651) . . Filament (→G Code control of filament)
- 14:06, 1 May 2014 (diff | hist) . . (+22) . . N ABS Juice (Redirected page to ABS Glue) (current)
- 14:04, 1 May 2014 (diff | hist) . . (0) . . m ABS Glue (current)
- 14:00, 1 May 2014 (diff | hist) . . (+336) . . ABS Glue (Add links to ABS Juice.)
- 14:24, 30 April 2014 (diff | hist) . . (+1) . . About (→Also See: update link)
- 13:37, 30 April 2014 (diff | hist) . . (+10) . . User:DaveX (→Experimenting with ParserFunctions) (current)
- 13:36, 30 April 2014 (diff | hist) . . (-1) . . User:DaveX (→Experimenting with ParserFunctions)
- 13:36, 30 April 2014 (diff | hist) . . (+205) . . User:DaveX (→Experimenting with Transclusion)
- 13:33, 30 April 2014 (diff | hist) . . (-305) . . User:DaveX/junk (current)
- 13:32, 30 April 2014 (diff | hist) . . (+99) . . User:DaveX (→Experimenting with Transclusion)
- 13:31, 30 April 2014 (diff | hist) . . (+62) . . User:DaveX/junk
- 13:28, 30 April 2014 (diff | hist) . . (+23) . . User:DaveX/junk
- 13:24, 30 April 2014 (diff | hist) . . (+216) . . User:DaveX (→Experimenting with Transclusion)
- 13:24, 30 April 2014 (diff | hist) . . (+1) . . User:DaveX/junk
- 13:17, 30 April 2014 (diff | hist) . . (+80) . . User:DaveX/junk
- 13:12, 30 April 2014 (diff | hist) . . (+93) . . User:DaveX/junk
- 13:02, 30 April 2014 (diff | hist) . . (+103) . . User:DaveX (→Experimenting with Transclusion)
- 13:01, 30 April 2014 (diff | hist) . . (-22) . . User:DaveX/junk
- 12:59, 30 April 2014 (diff | hist) . . (+114) . . User:DaveX/junk
- 12:54, 30 April 2014 (diff | hist) . . (+23) . . N User:DaveX/junk (Created page with "This is some test text.")
- 12:53, 30 April 2014 (diff | hist) . . (+609) . . User:DaveX (Play with "transclusion")
- 12:19, 30 April 2014 (diff | hist) . . (+1) . . m RUG/Pennsylvania/State College/RepRap Media Timeline (→April: typo)
- 12:18, 30 April 2014 (diff | hist) . . (+1) . . MetalicaRap (→Powder and metalurgy issues: typo)
- 12:17, 30 April 2014 (diff | hist) . . (0) . . m MetalicaRap (→Powder and metalurgy issues: typo)
- 12:14, 30 April 2014 (diff | hist) . . (0) . . m The incomplete RepRap Prusa Mendel beginner's guide (→Firmware: typo)
- 12:14, 30 April 2014 (diff | hist) . . (-1) . . ZemcikO hot end (→Tests: typo) (current)
- 13:56, 29 April 2014 (diff | hist) . . (+18) . . Category:Cold End (link directly to the Category:Hot_End w/o including it.) (current)
- 13:35, 29 April 2014 (diff | hist) . . (+182) . . Category:Cold End (Add text from glossary page)
- 12:17, 28 April 2014 (diff | hist) . . (+13) . . G-code (→M133: Set PID I limit value: Update units.)
- 11:24, 28 April 2014 (diff | hist) . . (+19) . . Printing Material Suppliers (→Thermoplastic Filament: Update name)
- 13:51, 25 April 2014 (diff | hist) . . (+32) . . RUG/Pennsylvania/State College/Student Buyer's Guide
- 13:51, 25 April 2014 (diff | hist) . . (-32) . . User talk:DaveX (Undo revision 123840 by DaveX (talk)) (current)
- 13:47, 25 April 2014 (diff | hist) . . (+32) . . User talk:DaveX (test merge tag)
- 14:26, 23 April 2014 (diff | hist) . . (0) . . G-code (→M109: Set Extruder Temperature and Wait)
- 14:24, 23 April 2014 (diff | hist) . . (+8) . . G-code (→M109: Set Extruder Temperature and Wait)
- 14:19, 23 April 2014 (diff | hist) . . (0) . . m G-code (→M132: Set PID D value)
- 12:50, 23 April 2014 (diff | hist) . . (+326) . . G-code (→G10: Tool Offset)
- 11:46, 23 April 2014 (diff | hist) . . (+234) . . G-code (→M133: Set PID I limit value: explain Teacup integral limit units.)
- 11:40, 23 April 2014 (diff | hist) . . (+281) . . G-code (→M132: Set PID D value: explain teacup Ki units.)
- 11:34, 23 April 2014 (diff | hist) . . (+284) . . G-code (→M131: Set PID I value: Explain Teacup Ki units)
- 11:31, 23 April 2014 (diff | hist) . . (+490) . . G-code (→M130: Set PID P value: Explain teacup Kp units.)
- 11:16, 23 April 2014 (diff | hist) . . (+95) . . G-code (→M301: Set PID parameters - Hot End)
- 17:03, 15 April 2014 (diff | hist) . . (+82) . . G-code (→M42 in Marlin/Sprinter)
- 19:44, 12 April 2014 (diff | hist) . . (+735) . . G-code (→M200 - Set filament diameter / Get Endstop Status: -- point to M119, and hints on 'volumetric calibration')
- 19:36, 12 April 2014 (diff | hist) . . (+325) . . RepRap software tweaking manual (→Measure the virgin filament section)
- 19:21, 12 April 2014 (diff | hist) . . (+627) . . Commissioning (→Calibrating the Extruder)
- 11:26, 10 April 2014 (diff | hist) . . (+84) . . PC Power Supply (→Required Minimum Specifications)
- 11:23, 10 April 2014 (diff | hist) . . (+441) . . PC Power Supply (→Required Minimum Specifications)
- 11:02, 10 April 2014 (diff | hist) . . (+48) . . PC Power Supply (→Wiring the supply)
- 16:29, 3 April 2014 (diff | hist) . . (+55) . . PLA (→Usage)
- 13:21, 1 April 2014 (diff | hist) . . (-209) . . Scaling (Undo revision 121594 by DaveX (talk) ...waiting for a different day.)
- 13:18, 1 April 2014 (diff | hist) . . (+209) . . Scaling (→Large Scale (Your house))
- 04:50, 1 April 2014 (diff | hist) . . (+167) . . PLA (→Heated Bed)
- 23:19, 29 March 2014 (diff | hist) . . (+1,192) . . G-code (→G1: Controlled move: Add G2 & G3)
- 22:41, 29 March 2014 (diff | hist) . . (+1) . . m G-code (→M551: Set Password: typo)
- 11:26, 29 March 2014 (diff | hist) . . (+83) . . Endstop (→Mechanical)
- 11:03, 29 March 2014 (diff | hist) . . (-47) . . RAMPS 1.4 (→Opto Endstops)
- 23:06, 23 March 2014 (diff | hist) . . (+538) . . PID Tuning (→PID Tuning by Commercial PID: Add notes on converting from Z-N Classic to others.)
- 12:53, 21 March 2014 (diff | hist) . . (-18) . . Heated Build Chamber (→Other designs)
- 12:51, 21 March 2014 (diff | hist) . . (+27) . . Heated Build Chamber (→Other ideas from Heated Build Platform page)
- 12:49, 21 March 2014 (diff | hist) . . (+57) . . Heated Build Chamber (→Turkey Bag)
- 12:49, 21 March 2014 (diff | hist) . . (+175) . . Heated Build Chamber (→Summary)
- 12:33, 21 March 2014 (diff | hist) . . (+241) . . Scaling (→scaling to larger RepRap)
- 12:27, 21 March 2014 (diff | hist) . . (+43) . . LeBigRep
- 12:26, 21 March 2014 (diff | hist) . . (+97) . . Cubic Meter Bot (current)
- 12:24, 21 March 2014 (diff | hist) . . (+47) . . 1X2 Tallcat
- 12:22, 21 March 2014 (diff | hist) . . (+48) . . CNC Router (→BigRap)
- 12:21, 21 March 2014 (diff | hist) . . (+63) . . Mendel Apollo (current)
- 12:18, 21 March 2014 (diff | hist) . . (+43) . . MegaMendel
- 12:15, 21 March 2014 (diff | hist) . . (+21) . . Big Mendel (current)
- 10:54, 21 March 2014 (diff | hist) . . (-26) . . Pololu Electronics (→Teensy Breadboard)
- 16:49, 20 March 2014 (diff | hist) . . (+120) . . Mendel90 (→Development)
- 16:31, 20 March 2014 (diff | hist) . . (+9) . . Wallace (→Printed parts: Note the 29 teeth on the printed pulley)
- 09:37, 20 March 2014 (diff | hist) . . (+3) . . Mendel90 Build Manual (→Bed Wiring)
- 09:34, 20 March 2014 (diff | hist) . . (+29) . . Mendel90 Build Manual (→Bed Wiring)
- 00:40, 20 March 2014 (diff | hist) . . (+2) . . Teensy Breadboard (→Compiling Teacup for Teensy using the Makefile) (current)
- 00:39, 20 March 2014 (diff | hist) . . (-5,580) . . Teensy Breadboard (Update compile transcript)
- 00:21, 20 March 2014 (diff | hist) . . (-46) . . Teensy Breadboard (Move the thermistor tables to my user page.)
- 00:20, 20 March 2014 (diff | hist) . . (+34) . . User:DaveX
- 00:16, 20 March 2014 (diff | hist) . . (+3,505) . . User:DaveX (→Thermistor/PID tuning per PID_Tuning)
- 23:59, 19 March 2014 (diff | hist) . . (+201) . . Teensy Breadboard (Added some development templates)
- 16:39, 19 March 2014 (diff | hist) . . (+57) . . Scaling (→scaling to larger RepRap: link to Development_Pathway#Increased_Build_Area)
- 15:19, 19 March 2014 (diff | hist) . . (+21) . . Teensy Breadboard
- 15:09, 19 March 2014 (diff | hist) . . (+7) . . Development Pathway (→MegaRap)
- 14:54, 19 March 2014 (diff | hist) . . (+4) . . B&TRap (→drawbacks)
- 14:53, 19 March 2014 (diff | hist) . . (+81) . . B&TRap (→drawbacks)
- 14:46, 19 March 2014 (diff | hist) . . (+50) . . Scaling (→scaling to larger RepRap)
- 14:23, 19 March 2014 (diff | hist) . . (+25) . . Scaling (→scaling to larger RepRap)
- 13:27, 6 March 2014 (diff | hist) . . (+14) . . Thermistor (→Thermistor Calculations)
- 13:24, 6 March 2014 (diff | hist) . . (+163) . . Thermistor (→Thermistor Calculations: Add links to firmware in comments on precision.)
- 15:34, 4 March 2014 (diff | hist) . . (+25) . . List of Abandoned and Deprecated Firmware (→Tonokip: update link...)
- 18:05, 27 February 2014 (diff | hist) . . (+74) . . Mendel90 Build Manual (→Connecting The Electronics)
- 22:47, 19 February 2014 (diff | hist) . . (+49) . . m User:DaveX (→Thermistor/PID tuning per PID_Tuning)
- 22:44, 19 February 2014 (diff | hist) . . (+295) . . User:DaveX (→Thermistor/PID tuning per PID_Tuning: Add some Teacup PID value conversions)
- 16:38, 17 February 2014 (diff | hist) . . (+343) . . PLA (→Usage)
- 02:57, 13 February 2014 (diff | hist) . . (+1,547) . . Wildseyed Simple Hot End (→Step Nine - The Connections) (current)
- 02:39, 13 February 2014 (diff | hist) . . (+7,720) . . User:DaveX (→Thermistor/PID tuning per PID_Tuning)
- 02:33, 13 February 2014 (diff | hist) . . (+684) . . User:DaveX (→Calculations)
- 02:21, 13 February 2014 (diff | hist) . . (+2,999) . . PID Tuning (Add section on tuning by converting Commercial PID controller values)
- 16:35, 6 February 2014 (diff | hist) . . (+89) . . SimulAVR (→Adding SIMINFO macros)
- 15:50, 6 February 2014 (diff | hist) . . (-1) . . SimulAVR (→Compiler environment, software download: s/essentials/essential/)
- 12:53, 28 January 2014 (diff | hist) . . (+471) . . PID Tuning (Add a hint about interpreting reprap's PID terms in the commercial time-based parameterization.)
- 12:31, 28 January 2014 (diff | hist) . . (+2) . . Teacup Firmware (→Is git new to you?)
- 13:54, 26 January 2014 (diff | hist) . . (+278) . . PID Tuning (Note that the PID output frequency, and that the PID values are shared between extruders.)
- 12:31, 26 January 2014 (diff | hist) . . (-1) . . Temperature control
- 12:31, 26 January 2014 (diff | hist) . . (+371) . . Temperature control
- 01:16, 22 January 2014 (diff | hist) . . (-99) . . PID Tuning (remove broken link)
- 01:15, 22 January 2014 (diff | hist) . . (+114) . . PID Tuning (remove broken link, add explanation of 'I' limit term.)
- 01:00, 22 January 2014 (diff | hist) . . (+12) . . PID Tuning
- 01:00, 22 January 2014 (diff | hist) . . (+965) . . PID Tuning (Add a PID autotune example and interpret the units of the PID terms.)
- 00:16, 21 January 2014 (diff | hist) . . (+461) . . PID Tuning (Add a ref on the Marlin autotune procedure.)
- 11:01, 17 January 2014 (diff | hist) . . (+46) . . Balancing ATX Supplies (Add Watts column.)
- 10:46, 17 January 2014 (diff | hist) . . (+10) . . PC Power Supply (→Color coding)
- 10:45, 17 January 2014 (diff | hist) . . (+16) . . PC Power Supply (→Simpler permanent modifications)
- 01:16, 17 January 2014 (diff | hist) . . (+241) . . Teensy Breadboard (→Teensy++ 2.0: move pins)
- 01:04, 17 January 2014 (diff | hist) . . (+68) . . Teensy Breadboard (→Wiring: update usb power wiring)
- 14:40, 16 January 2014 (diff | hist) . . (+248) . . Teensy Breadboard (→Discussion on first build)
- 16:07, 13 January 2014 (diff | hist) . . (-109) . . Teensy Breadboard (→Firmware)
- 16:04, 13 January 2014 (diff | hist) . . (-43) . . Teensy Breadboard (→Discussion on first build: Teacup github change)
- 16:01, 13 January 2014 (diff | hist) . . (+20) . . Teensy Breadboard (→Firmware: triffid->traumflug change)
- 15:34, 13 January 2014 (diff | hist) . . (+33) . . Teensylu (→Compatible Firmwares)
- 15:33, 13 January 2014 (diff | hist) . . (+10) . . Printrboard (→Compatible Firmware)
- 15:30, 13 January 2014 (diff | hist) . . (+2,241) . . Teensy Breadboard (→Pinout: Add a Teensy++2.0 layout.)
- 15:13, 13 January 2014 (diff | hist) . . (+4) . . m Teensy Breadboard (→Pinout: Change link for Teacup code moving.)
- 12:42, 29 March 2013 (diff | hist) . . (+47) . . Electrochemical Machining (→Comparison ECM vs EDM)
- 11:26, 21 March 2013 (diff | hist) . . (-107) . . Teacup Firmware (Move R2-C2 ARM port to 'Enhancements")
- 11:24, 21 March 2013 (diff | hist) . . (+134) . . Teacup Firmware (→Enhancements)
- 00:47, 16 February 2013 (diff | hist) . . (+145) . . Teacup Firmware (→Enhancements: ARM porting)
- 12:21, 4 February 2013 (diff | hist) . . (+376) . . Teacup Firmware (Split →Patches, Enhancements: and provide links to developmental code.)
- 12:45, 31 January 2013 (diff | hist) . . (+3) . . m Sanguinololu (fix Pololu_Electronics#Sanguinololu sidebar link)
- 17:48, 18 January 2013 (diff | hist) . . (-2,016) . . Wallace Build Manual (→Dimensions)
- 17:48, 18 January 2013 (diff | hist) . . (+651) . . User:DaveX (→My Wallace Rod Sizes)
- 17:47, 18 January 2013 (diff | hist) . . (+1,407) . . User:DaveX (Add Wallace rod sizes)
- 17:09, 26 November 2012 (diff | hist) . . (+1,392) . . Talk:Teensy Breadboard (ADC noise from ATX powersupply) (current)
- 14:33, 26 November 2012 (diff | hist) . . (+173) . . Talk:Teensy Breadboard (Modified transcript.)
- 01:10, 26 November 2012 (diff | hist) . . (+1,930) . . Teensy Breadboard (→Compiling Teacup for Teensy using the Makefile: update transcript to work with recent release)
- 00:45, 26 November 2012 (diff | hist) . . (+642) . . Teensy Breadboard (→Discussion on first build: noisy ATX: 50mVpp)
- 16:41, 20 November 2012 (diff | hist) . . (+66) . . Teensy Breadboard (→Wiring: Clarify ATX PS_ON input to DIO0 output.)
- 14:00, 20 November 2012 (diff | hist) . . (+198) . . Stepper motor (→Shortcut for finding the proper wiring sequence: (doesn't always work. E.g: A1 B1 A2 B2))
- 11:26, 20 November 2012 (diff | hist) . . (+170) . . Teensy Breadboard (→Wiring)
- 11:52, 14 November 2012 (diff | hist) . . (+99) . . m Teensy Breadboard (→Compiling a Gen7 Teacup for Teensy: call out the commit tag)
- 11:49, 14 November 2012 (diff | hist) . . (+2,558) . . Teensy Breadboard (Add Teacup Gen7 compilation transcript)
- 07:34, 9 November 2012 (diff | hist) . . (+3,476) . . Teensy Breadboard (Add EPCOS 100K Thermistor (B57560G104F) table)
- 06:03, 9 November 2012 (diff | hist) . . (+74) . . Thermistor (→Thermistors vs thermocouples)
- 17:03, 8 November 2012 (diff | hist) . . (+1,740) . . Thermistor (→Theory: clean up some formulas and explain the R1=0 in the tables.)
- 15:34, 8 November 2012 (diff | hist) . . (+94) . . Teensy Breadboard (→Parts)
- 15:22, 8 November 2012 (diff | hist) . . (+23) . . Teensy Breadboard (→Parts: move to R2=2700 for a B=4092K, 100K thermistor with mid-range at ~130C)
- 12:03, 8 November 2012 (diff | hist) . . (+199) . . Teensy Breadboard
- 17:33, 7 November 2012 (diff | hist) . . (+1,151) . . Talk:Thermistor (Patch for createTemperatureLookup.py to enable the --num-temps= option)
- 15:34, 6 November 2012 (diff | hist) . . (+71) . . Thermistor (→RepRap Thermistors: point to schematic.)
- 14:22, 6 November 2012 (diff | hist) . . (+815) . . Talk:Thermistor
- 14:08, 6 November 2012 (diff | hist) . . (-6) . . Temperature Sensor v2.0 (→Schematic: bigger)
- 23:18, 5 November 2012 (diff | hist) . . (+179) . . User talk:DaveX
- 23:16, 5 November 2012 (diff | hist) . . (+174) . . N User talk:Chimera15 (Created page with 'Hi Chimera15. If you make Teensy Breadboard, I recommend trying the Teensy++ 2.0 so you have more choices in firmware. ~~~~')
- 23:55, 4 November 2012 (diff | hist) . . (+532) . . Teensy Breadboard (→Discussion on first build)
- 23:06, 4 November 2012 (diff | hist) . . (+19) . . Teensy Breadboard (→Teensy Breadboard: recommend Teensy++ upgrade.)
- 01:50, 3 November 2012 (diff | hist) . . (-12) . . Thermistor (→EPCOS 100K Thermistor (B57560G104F): replace C*4 table with C*1 table)
- 14:30, 1 November 2012 (diff | hist) . . (+243) . . Teensy Breadboard (→Philosophy)
- 13:44, 1 November 2012 (diff | hist) . . (0) . . Thermistor (reorder to make EPCOS thermistors adjacent)
- 13:42, 1 November 2012 (diff | hist) . . (+1,270) . . Thermistor (Add →EPCOS 100K Thermistor (B57560G104F))
- 13:26, 1 November 2012 (diff | hist) . . (+200) . . Calibration (→Instructions: Liquid extrusion means that the extruder is too hot)
- 13:14, 1 November 2012 (diff | hist) . . (+111) . . Talk:Wade's Geared Extruder (→Filing and hobbing the bolt: groove depth rather than diameter change)
- 12:25, 1 November 2012 (diff | hist) . . (+168) . . Teensy Breadboard (→Parts: Note that you can start with one heater driver for the extruder.)
- 12:15, 1 November 2012 (diff | hist) . . (+243) . . Teensy Breadboard (→Philosophy)
- 11:56, 1 November 2012 (diff | hist) . . (+109) . . Teensy Breadboard (→Wiring: add detail on voltage divider connections)
- 11:45, 1 November 2012 (diff | hist) . . (+7) . . Teensy Breadboard (→Teensy Breadboard: Update picture with 2012-10-31 layout/image)
- 11:43, 1 November 2012 (diff | hist) . . (+45) . . N File:TeensyBreadboard20121031.JPG (Teensy Breadboard layout as of 2012-10-31) (current)
- 23:28, 30 October 2012 (diff | hist) . . (+215) . . Extruder Pluggable Wiring Convention (D-sub 9pin on Mendel90)
- 14:35, 30 October 2012 (diff | hist) . . (+33) . . Teensy Breadboard (→Wiring)
- 14:28, 30 October 2012 (diff | hist) . . (+234) . . Teensy Breadboard (→Parts: Note that overtemp feedback on the OMNIFETs need a gate resistor.)
- 13:52, 30 October 2012 (diff | hist) . . (+650) . . Teensy Breadboard (→Parts)
- 01:58, 30 October 2012 (diff | hist) . . (+149) . . Teensy Breadboard (→Discussion on first build)
- 01:54, 30 October 2012 (diff | hist) . . (+99) . . Teensy Breadboard (→Wiring)
- 01:51, 30 October 2012 (diff | hist) . . (+2,811) . . Teensy Breadboard (→Pinout: -- Add parts list and wiring guide)
- 01:41, 30 October 2012 (diff | hist) . . (+102) . . Pololu stepper driver board (→List of Boards: add alternatives)
- 00:42, 30 October 2012 (diff | hist) . . (+183) . . User talk:DaveX
- 16:04, 25 October 2012 (diff | hist) . . (+608) . . Teensy Breadboard (→Discussion on first build)
- 14:40, 25 October 2012 (diff | hist) . . (+3) . . m User:DaveX (→My Wallace Build)
- 14:35, 25 October 2012 (diff | hist) . . (+100) . . Wallace (→Overview)
- 03:49, 25 October 2012 (diff | hist) . . (+33) . . Protected Mosfet
- 02:16, 25 October 2012 (diff | hist) . . (0) . . m User:DaveX (→My Wallace Build)
- 12:31, 23 October 2012 (diff | hist) . . (+41) . . m Teensy Breadboard (→Firmware)
- 12:29, 23 October 2012 (diff | hist) . . (+187) . . Teensy Breadboard (pronterface screenshot and EWMA smoothing)
- 11:59, 23 October 2012 (diff | hist) . . (+88) . . N File:TeacupGen7 Teensy Pronterface.png (Screen shot of Pronterface showing Teacup Gen7 branch running on a Teensy Breadboard) (current)
- 16:41, 19 October 2012 (diff | hist) . . (+1,052) . . Teensy Breadboard (→Teensy Breadboard)
- 16:15, 19 October 2012 (diff | hist) . . (+1) . . Teensy Breadboard (→Pinout)
- 16:14, 19 October 2012 (diff | hist) . . (+1,661) . . Teensy Breadboard (→Firmware: show pinouts)
- 16:05, 19 October 2012 (diff | hist) . . (+26) . . User:DaveX (→Things to do:)
- 16:04, 19 October 2012 (diff | hist) . . (+240) . . User:DaveX (→My Wallace Build)
- 23:18, 17 October 2012 (diff | hist) . . (+1) . . User:DaveX (→Calculations)
- 23:17, 17 October 2012 (diff | hist) . . (+800) . . User:DaveX (→My Wallace Build)
- 12:04, 13 October 2012 (diff | hist) . . (+105) . . G-code (→M200 - Set filament diameter / Get Endstop Status)
- 12:02, 13 October 2012 (diff | hist) . . (+254) . . G-code (→M200 - Set filament diameter & endstop status: -- M200 differs by firmware)
- 11:58, 13 October 2012 (diff | hist) . . (+234) . . G-code (→M119: Get Endstop Status: Teacup's endstop report is M200)
- 16:46, 11 October 2012 (diff | hist) . . (+401) . . Commissioning (→Calibrating the Extruder)
- 15:11, 3 October 2012 (diff | hist) . . (0) . . G-code (→G28: Move to Origin: Teacup does it.)
- 13:19, 3 October 2012 (diff | hist) . . (+166) . . Teensy Breadboard (Add Teacup firmware github links)
- 12:47, 3 October 2012 (diff | hist) . . (-37) . . User:DaveX (→My Wallace Build)
- 11:45, 3 October 2012 (diff | hist) . . (0) . . Wallace (→Parts)
- 11:44, 3 October 2012 (diff | hist) . . (+222) . . Wallace (→Specifications: Add some numbers)
- 14:09, 1 October 2012 (diff | hist) . . (+390) . . Teensy Breadboard (→Options)
- 15:26, 28 September 2012 (diff | hist) . . (+41) . . Pololu Electronics (→Teensy Breadboard: add pic)
- 15:25, 28 September 2012 (diff | hist) . . (+62) . . Teensy Breadboard (→Options)
- 15:23, 28 September 2012 (diff | hist) . . (+1,321) . . N Teensy Breadboard (Add picture and description.)
- 15:02, 28 September 2012 (diff | hist) . . (+39) . . N File:TeensyBreadboard.JPG (Image of a Teensy Breadboard setup.) (current)
- 16:37, 27 September 2012 (diff | hist) . . (+192) . . User:DaveX (Add Teacup firmware configured for Teensy 2.0 link.)
- 17:20, 26 September 2012 (diff | hist) . . (+4,190) . . G-code (Add some Teacup M-codes)
- 15:27, 25 September 2012 (diff | hist) . . (+343) . . N Hot Melt Extruder (Make note of a hot melt glue-gun extruder) (current)
- 23:26, 17 September 2012 (diff | hist) . . (-139) . . User:DaveX (minor Wallace build updates)
- 15:43, 17 September 2012 (diff | hist) . . (+158) . . User:DaveX (→Mistakes: add flats on steppers.)
- 11:13, 17 September 2012 (diff | hist) . . (+177) . . User:DaveX (→Things to do:)
- 00:19, 15 September 2012 (diff | hist) . . (-11) . . Pololu Electronics (→Teensy Breadboard)
- 14:23, 4 September 2012 (diff | hist) . . (+77) . . SyringeBasedExtruder (→Syringe Based Extruder) (current)
- 14:03, 4 September 2012 (diff | hist) . . (+85) . . SyringeBasedExtruder (→Syringe Based Extruder: add http://www.thingiverse.com/thing:20733)
- 13:38, 4 September 2012 (diff | hist) . . (+332) . . Materials (→Solder: -- add section)
- 14:52, 30 August 2012 (diff | hist) . . (+48) . . Mounting plate (add 'groovemount' word.) (current)
- 14:47, 30 August 2012 (diff | hist) . . (+161) . . m Mixer extruder
- 14:41, 30 August 2012 (diff | hist) . . (+387) . . Mixer extruder (add some links and categories)
- 14:49, 27 August 2012 (diff | hist) . . (+215) . . User:DaveX (Some extruder wiring planning)
- 23:31, 26 August 2012 (diff | hist) . . (+55) . . Pololu Electronics (→Teensy Breadboard: $27 Teensy++ breadboard could lead to compatibility with other boards and firmwares.)
- 23:23, 26 August 2012 (diff | hist) . . (+355) . . User:DaveX (→My Wallace Build: -- use male D9 connector per Mendel90_Build_Manual#Extruder_Wiring)
- 22:54, 11 August 2012 (diff | hist) . . (+7) . . m Mendel90 Build Manual (→Extruder Wiring)
- 22:54, 11 August 2012 (diff | hist) . . (+6) . . Mendel90 Build Manual (→X Axis Wiring: female D connector on ribbon cable, male D on extruder per http://hydraraptor.blogspot.com/2011/12/mendel90-extruder.html)
- 22:50, 11 August 2012 (diff | hist) . . (+572) . . Mendel90 Build Manual (→Extruder Wiring: -- add D-9 pinouts)
- 15:57, 11 August 2012 (diff | hist) . . (+71) . . Wallace Build Manual (→X End Idler (Left Side): link to pic showing mounting of x-axis idler.)
- 15:49, 11 August 2012 (diff | hist) . . (+315) . . User:DaveX/WallacePics (ID some Wallace build pictures) (current)
- 15:38, 8 August 2012 (diff | hist) . . (+370) . . Wallace Build Manual (One can use a printed Idler pulley on the back of the X end idler.)
- 11:44, 23 March 2012 (diff | hist) . . (+83) . . Wallace (→Printed parts)
- 22:41, 10 March 2012 (diff | hist) . . (+236) . . Heated Bed (→Hot Plate: Add motorcycle grip heaters per http://open3dp.me.washington.edu/2012/03/of-hbp-and-other-hot-things/)
- 16:53, 8 March 2012 (diff | hist) . . (+127) . . Printing Material Suppliers (→3mm diameter filament)
- 13:36, 8 March 2012 (diff | hist) . . (0) . . m Comparison of Electronics (Correct R2C2 limt switches and temp sensors to 3 & 2)
- 13:32, 8 March 2012 (diff | hist) . . (+27) . . Comparison of Electronics (attempt to make the table sortable per http://meta.wikimedia.org/wiki/Help:Sorting)
- 23:46, 7 March 2012 (diff | hist) . . (+15) . . m Polycarbonate (→Availability: $23 per 0.5 lb & 3mm link)
- 15:03, 7 March 2012 (diff | hist) . . (+669) . . Talk:Mendel90 (MDF CTE is very likely less than steel.)
- 12:21, 6 March 2012 (diff | hist) . . (-7) . . m Printrboard (→Building Firmware: add links)
- 12:18, 6 March 2012 (diff | hist) . . (+69) . . Printrboard (→Where to get it: estimate of availability after 2012-April)
- 12:12, 6 March 2012 (diff | hist) . . (+205) . . Comparison of Electronics (Add Teensylu and Printrboard)
- 12:06, 6 March 2012 (diff | hist) . . (+211) . . Comparison of Electronics
- 13:14, 5 March 2012 (diff | hist) . . (+4) . . m Cost Reduction (→Hot End)
- 13:00, 5 March 2012 (diff | hist) . . (+260) . . Mendel90 (Adjust some advantages and disadvantages)
- 12:35, 5 March 2012 (diff | hist) . . (+91) . . Frame material (→cut-to-shape construction materials: Add Mendel90)
- 12:11, 4 March 2012 (diff | hist) . . (-52) . . Mendel90 (→Disadvantages: As compared with Prusa, a build volume increase for Mendel90 would require a similar frame transplant.)
- 12:07, 4 March 2012 (diff | hist) . . (+142) . . Mendel90 (→Advantages)
- 11:55, 4 March 2012 (diff | hist) . . (+192) . . Mendel90 (Add link to Nophead's design pages and a thingiverse page)
- 00:28, 1 March 2012 (diff | hist) . . (+66) . . Teacup Firmware (→Distances as expressed in steps: Thanks, the steps/second testing helps a lot for estimating max feedrates.)
- 16:11, 29 February 2012 (diff | hist) . . (+263) . . Teacup Firmware (→Distances as expressed in steps)
- 15:52, 27 February 2012 (diff | hist) . . (+16) . . Materials (→Steel)
- 15:47, 27 February 2012 (diff | hist) . . (+38) . . Materials (→PEEK)
- 15:44, 27 February 2012 (diff | hist) . . (+18) . . m Materials (→PEEK: add CTC)
- 15:42, 27 February 2012 (diff | hist) . . (+56) . . m Materials (→Copper: add CTC)
- 15:40, 27 February 2012 (diff | hist) . . (+23) . . m Materials (→Aluminum: add CTC numbers)
- 15:37, 27 February 2012 (diff | hist) . . (+37) . . Materials (→Steel)
- 19:58, 26 February 2012 (diff | hist) . . (+31) . . J Head Nozzle (→Weights: Add OAL of ~62mm)
- 13:01, 26 February 2012 (diff | hist) . . (-6) . . m Teacup Firmware (→Distances as expressed in steps)
- 12:54, 26 February 2012 (diff | hist) . . (+1,736) . . Teacup Firmware (→Constant Acceleration: Add distance and velocity customizations)
- 10:53, 26 February 2012 (diff | hist) . . (+1) . . m Pololu stepper driver board (→Tuning: fix link)
- 10:52, 26 February 2012 (diff | hist) . . (+1,055) . . Pololu stepper driver board (Add formula for tuning)
- 03:58, 26 February 2012 (diff | hist) . . (+470) . . User:DaveX (Replaced stepper and tuned Pololus)
- 23:42, 25 February 2012 (diff | hist) . . (+125) . . Pololu Electronics (→Teensy Breadboard: Tested USB connection at 250000 baud with modified Teacup)
- 23:22, 24 February 2012 (diff | hist) . . (+24) . . m Protected Mosfet
- 23:19, 24 February 2012 (diff | hist) . . (+21) . . m Sanguinololu (→Soldering Sanguinololu Core)
- 23:17, 24 February 2012 (diff | hist) . . (+976) . . N Protected Mosfet (A table of various MOSFETS and protection in use in RepRaps)
- 22:38, 24 February 2012 (diff | hist) . . (+14) . . m RAMPS 1.2
- 22:36, 24 February 2012 (diff | hist) . . (+14) . . m RAMPS 1.2
- 17:22, 21 February 2012 (diff | hist) . . (0) . . Kapton Tape (→Description)
- 17:20, 21 February 2012 (diff | hist) . . (+208) . . Kapton Tape (→Description: Add some reference numbers about Kapton)
- 17:09, 21 February 2012 (diff | hist) . . (+254) . . Stepper motor (→Heat: Add numeric example of derating torque for a heat constraint.)
- 17:06, 21 February 2012 (diff | hist) . . (+54) . . PLA (Added glass transition temperature)
- 16:43, 20 February 2012 (diff | hist) . . (+1,652) . . User:DaveX (Burned up a stepper in my build.)
- 16:00, 20 February 2012 (diff | hist) . . (+325) . . Pololu stepper driver board (Note that the symptom of using the overcurrent protection is pulsing.)
- 23:00, 18 February 2012 (diff | hist) . . (0) . . m Wallace ("Full size" build volume is 200x200x140)
- 16:07, 18 February 2012 (diff | hist) . . (+144) . . User:DaveX (Correct the smooth rod lengths, measure the build volume, and the overall dimensions of my Wallace)
- 15:22, 18 February 2012 (diff | hist) . . (+390) . . Wallace Build Manual (→Dimensions: Add link to pictures of 350x300x430 smooth rods giving a 172x218x220 build volume & increase my X-rod recommendation to 380mm for 200mm X with a Wade's)
- 14:54, 18 February 2012 (diff | hist) . . (+392) . . N User:DaveX/WallacePics (Page collecting some pictures of the current state of my Wallace)
- 14:47, 18 February 2012 (diff | hist) . . (+171) . . N File:WallaceDaveX20120218-Zneg.JPG (View along negative Z axis of User:DaveX's Wallace, showing bed, dimension measurements, nophead's half-belt twist and face-to-face clamping of belt in X-carriage.) (current)
- 14:45, 18 February 2012 (diff | hist) . . (+142) . . N File:WallaceDaveX20120218-Yneg.JPG (View along negative Y axis of User:DaveX's Wallace, showing nophead's half-belt twist and face-to-face clamping of belt in X-carriage.) (current)
- 14:43, 18 February 2012 (diff | hist) . . (+144) . . N File:WallaceDaveX20120218-XnegHigh.JPG (Higher view along negative X of User:DaveX's Wallace, showing overall height of 442 based on 430mm z rods, and maybe 220 mm of Z travel.) (current)
- 14:35, 18 February 2012 (diff | hist) . . (+53) . . N File:WallaceDaveX20120218-Xneg.JPG (View along negative X of User:DaveX's Wallace) (current)
- 14:33, 18 February 2012 (diff | hist) . . (+42) . . N File:WallaceDaveX20120218-Front.JPG (Front view of User:DaveX's Wallace) (current)
- 14:31, 18 February 2012 (diff | hist) . . (+69) . . N File:WallaceDaveX20120218-Ytravel.JPG (View of bed and Y travel measurements of User:DaveX's Wallace) (current)
- 14:29, 18 February 2012 (diff | hist) . . (+84) . . N File:WallaceDaveX20120218-betweenZ 282mm.JPG (View of bed and rod, build, and overall measurements of User:DaveX's Wallace) (current)
- 14:27, 18 February 2012 (diff | hist) . . (+84) . . N File:WallaceDaveX20120218-atBedWDimensions.JPG (View of bed and rod, build, and overall measurements of User:DaveX's Wallace) (current)
- 14:23, 18 February 2012 (diff | hist) . . (+65) . . N File:WallaceDaveX20120218-alongX-ofExtruder.JPG (Side view along X of Hinged Wades on User:DaveX's Wallace) (current)
- 14:19, 18 February 2012 (diff | hist) . . (+36) . . N File:WallaceDaveX20120218-00.JPG (Side view of DaveX's Wallace) (current)
- 02:44, 18 February 2012 (diff | hist) . . (-49) . . User:DaveX (Add non-stubby Y smooth rods & pegboard bed)
- 02:37, 18 February 2012 (diff | hist) . . (+25) . . m Wallace (→Parts)
- 02:33, 18 February 2012 (diff | hist) . . (+28) . . m Wallace (→Parts: add 4 M6 Washers for top brace rod)
- 02:27, 18 February 2012 (diff | hist) . . (+194) . . Wallace Build Manual (→5. Bringing the X Y and Z together.: Add Z-top clamp and Z-bar parallelism adjustment)
- 02:22, 18 February 2012 (diff | hist) . . (+121) . . Wallace Build Manual (→3. Y Axis: Align y axis by adjusting base hex nuts)
- 02:16, 18 February 2012 (diff | hist) . . (0) . . m Wallace Build Manual (→Dimensions: typo -- I used a NEMA14/6mm build rather than NEMA17 build for these measurements)
- 20:45, 16 February 2012 (diff | hist) . . (-143) . . Talk:Full Rod Cut List (Removed my comment.) (current)
- 14:48, 16 February 2012 (diff | hist) . . (+1,123) . . Talk:Wildseyed Simple Hot End (→Heat Transfer simulation cartoon: new section) (current)
- 14:21, 16 February 2012 (diff | hist) . . (+154) . . N File:MATLABScreenSnapz001.png (A heat transfer cartoon based on a freehand sketch of a hacked Wildseyed hot-end. TCEs: Al: 187, brass: 391, PTFE 4, heater hole at 200C, ambient at 40C.) (current)
- 17:26, 15 February 2012 (diff | hist) . . (+1,269) . . N User:DaveX (Status of my Wallace)
- 13:13, 15 February 2012 (diff | hist) . . (+51) . . Tantillus (→Features: interesting drive train: wound cables. Added category)
- 12:30, 15 February 2012 (diff | hist) . . (0) . . m Wallace (→Printed parts)
- 12:29, 15 February 2012 (diff | hist) . . (+266) . . Wallace (→Parts: notes on MXL drive pulley settings)
- 12:16, 15 February 2012 (diff | hist) . . (+99) . . RepRapMechanics (→Cartesian Robot (3-axis machine): Add Mendel's XZ print head over Y printbed config.)
- 12:12, 15 February 2012 (diff | hist) . . (+14) . . m RepRapMechanics (→Cartesian Robot (3-axis machine))
- 12:04, 15 February 2012 (diff | hist) . . (+2) . . m Category:DriveTrains (→rotary to linear motion conversion)
- 12:03, 15 February 2012 (diff | hist) . . (+2) . . m Category:DriveTrains (→rotary to linear motion conversion)
- 12:03, 15 February 2012 (diff | hist) . . (+167) . . Category:DriveTrains (→rotary to linear motion conversion: -- Add spooled cable drive, with examples.)
- 11:44, 15 February 2012 (diff | hist) . . (+449) . . Talk:Wildseyed Simple Hot End (→Specifications)
- 11:29, 15 February 2012 (diff | hist) . . (+480) . . Talk:Wildseyed Simple Hot End (→Air hose Adapter machining)
- 11:05, 15 February 2012 (diff | hist) . . (+143) . . N Talk:Full Rod Cut List (Q about rod A being threaded in the graphic)
- 13:59, 14 February 2012 (diff | hist) . . (+553) . . Talk:Wildseyed Simple Hot End (Question about working the brass air fitting.)
- 23:38, 13 February 2012 (diff | hist) . . (+122) . . Pololu Electronics (→Teensy Breadboard)
- 11:47, 13 February 2012 (diff | hist) . . (+247) . . Talk:PCB Heatbed (Add a question about the overall dimensions of the PCB board.)
- 12:37, 11 February 2012 (diff | hist) . . (+2) . . m Vertical X Axis Standard
- 12:36, 11 February 2012 (diff | hist) . . (+293) . . Vertical X Axis Standard (→Other projects with Vertical X Axis)
- 23:10, 10 February 2012 (diff | hist) . . (+21) . . PCB Milling (→Eagle: the freeware limitations are 100x80mm, 2 layers)
- 11:44, 10 February 2012 (diff | hist) . . (+134) . . Wallace (Note that Wallace is capable of a full-size 200x200x170mm build envelope.)
- 11:40, 10 February 2012 (diff | hist) . . (+334) . . Wallace (→Printed parts: Add links to complete Wallace set of printed parts on a single (and multiple plates))
- 11:21, 10 February 2012 (diff | hist) . . (+68) . . N File:200mm plate display medium.jpg (An image of the STL for Wallace on 3/4 of a 200x200x70 mm plate.) (current)
- 14:11, 9 February 2012 (diff | hist) . . (+1,195) . . Talk:Wade's Geared Extruder (→Filing and hobbing the bolt)
- 00:09, 9 February 2012 (diff | hist) . . (+96) . . Wildseyed Simple Hot End (→Step Three - The MIG Welder Tip: Drill out the MIG tip?)
- 16:00, 8 February 2012 (diff | hist) . . (+23) . . N MendelMax Buyers Guide (Redirected page to MendelMax) (current)
- 15:58, 8 February 2012 (diff | hist) . . (+47) . . N MendelMax Build Manual (Populate a front-page red link) (current)
- 15:52, 8 February 2012 (diff | hist) . . (+472) . . N Wallace Buyers Guide (Fill a red link on the front page.)
- 14:51, 8 February 2012 (diff | hist) . . (+95) . . Wallace Build Manual (→Assembly: Format some headings as headings)
- 13:16, 8 February 2012 (diff | hist) . . (+250) . . m Wallace Build Manual (→Assembly: Bed width of <305mm for 375mm smooth rods & 200mm X travel)
- 13:08, 8 February 2012 (diff | hist) . . (-23) . . m Wallace Build Manual (→Assembly: reformat link to be internal)
- 13:07, 8 February 2012 (diff | hist) . . (+1,129) . . Wallace Build Manual (Threaded rod cut-plan calculations and examples)
- 10:26, 8 February 2012 (diff | hist) . . (+32) . . N Wallace User Manual (Basically the same information as Prusa and Mendel) (current)
- 22:47, 7 February 2012 (diff | hist) . . (+80) . . Wallace (Refine quntities of parts and their use.)
- 15:14, 7 February 2012 (diff | hist) . . (+51) . . Wallace Build Manual (Change y-idler bolt length to 25mm from 20.)
- 13:26, 7 February 2012 (diff | hist) . . (+62) . . Wallace Build Manual
- 17:36, 6 February 2012 (diff | hist) . . (+319) . . Talk:Wade's Geared Extruder (→Filing and hobbing the bolt: new section)
- 16:18, 6 February 2012 (diff | hist) . . (+1,205) . . Wallace Build Manual (some rod calculations.)
- 15:11, 6 February 2012 (diff | hist) . . (-27) . . m Wallace (Reformat link to Wallace Build Manual)
- 18:20, 3 February 2012 (diff | hist) . . (+60) . . Wallace (→Printed parts: A 12 tooth GT2 ot XL pulley would be close in diameter to the idlers.)
- 17:57, 3 February 2012 (diff | hist) . . (+959) . . Talk:Wallace Build Manual (→Rod and Bar sizes) (current)
- 17:23, 3 February 2012 (diff | hist) . . (+76) . . m File:WallaceParts20120203.jpg (Add http://www.fabbr.com/ as the maker.) (current)
- 17:16, 3 February 2012 (diff | hist) . . (+48) . . Wallace (→Printed parts)
- 17:12, 3 February 2012 (diff | hist) . . (+190) . . N File:WallaceMXLpulley20120203small.JPG (This was built from Wallace's http://www.thingiverse.com/download:48341 by the folks at http://www.fabbr.com/ A high-res image is available at http://www.thingiverse.com/derivative:21462) (current)
- 16:56, 3 February 2012 (diff | hist) . . (+40) . . Wallace (→Printed parts)
- 16:50, 3 February 2012 (diff | hist) . . (+1) . . m File:WallaceParts20120203 small.jpg (current)
- 16:48, 3 February 2012 (diff | hist) . . (+70) . . N File:WallaceParts20120203 small.jpg (Thumbnail version of File:WallaceParts20120203.jpg for Wallace)
- 12:26, 3 February 2012 (diff | hist) . . (+73) . . Wallace (→Printed parts)
- 12:21, 3 February 2012 (diff | hist) . . (+4) . . File:WallaceParts20120203.jpg
- 12:18, 3 February 2012 (diff | hist) . . (+34) . . N File:WallaceParts20120203.jpg (Printed parts for a RepRap Wallace)
- 00:06, 3 February 2012 (diff | hist) . . (+487) . . Talk:Wallace Build Manual (→Rod and Bar sizes: new section)
- 18:11, 2 February 2012 (diff | hist) . . (+163) . . Talk:Wallace (→M6 Nylock nuts: new section)
- 17:30, 2 February 2012 (diff | hist) . . (+38) . . Wallace (→Parts)
- 16:06, 2 February 2012 (diff | hist) . . (+15) . . Wallace (→Parts)
- 01:26, 2 February 2012 (diff | hist) . . (-2) . . m Teacup Firmware (→|Codes)
- 01:25, 2 February 2012 (diff | hist) . . (+387) . . Teacup Firmware (→Endstop Handling)
- 15:54, 1 February 2012 (diff | hist) . . (+443) . . Wallace (→Parts)
- 14:35, 31 January 2012 (diff | hist) . . (+38) . . Wallace (Added a part making video)
- 16:40, 29 January 2012 (diff | hist) . . (+25) . . m Wallace (→Parts)
- 16:11, 29 January 2012 (diff | hist) . . (+46) . . Wallace (→Parts)
- 10:36, 26 January 2012 (diff | hist) . . (+206) . . Talk:Wade's Geared Extruder (→Pressures, strengths, torque and scaling for 1.75mm filament)
- 17:59, 25 January 2012 (diff | hist) . . (+122) . . ABS (→Further reading)
- 17:20, 25 January 2012 (diff | hist) . . (+971) . . Talk:Wade's Geared Extruder (→Pressures, strengths, torque and scaling for 1.75mm filament: new section)
- 11:21, 25 January 2012 (diff | hist) . . (+49) . . Wade's Geared Extruder (Note that 5kg*cm torque requirement = 49 N*cm and 69 ozf*in, and 40 N*cm=4.07 kgf*cm and 56.6 ozf*in)
- 00:36, 25 January 2012 (diff | hist) . . (+444) . . Belt (Add some belt pitch types.)
- 23:43, 22 January 2012 (diff | hist) . . (+131) . . List of electronics (→R2C2 Electronics)
- 23:49, 19 January 2012 (diff | hist) . . (+153) . . Wallace (→Parts)
- 16:37, 19 January 2012 (diff | hist) . . (-5) . . m Stepper motor (→Suppliers)
- 16:33, 19 January 2012 (diff | hist) . . (+177) . . Stepper motor (→Suppliers: added Makerbot's custom high torque extruder stepper)
- 14:23, 19 January 2012 (diff | hist) . . (+39) . . Heated Bed (→Etched PCB as a heating Element: add 120W power spec to mfg board.)
- 13:57, 19 January 2012 (diff | hist) . . (+116) . . m Wildseyed Simple Hot End (→Tools Required)
- 13:19, 19 January 2012 (diff | hist) . . (+308) . . Wildseyed Simple Hot End (Add note about turning a step on the OD of the PTFE rod.)
- 17:19, 18 January 2012 (diff | hist) . . (+12) . . List of electronics (→Sanguinololu: add link to Pololu Electronics page)
- 17:11, 18 January 2012 (diff | hist) . . (+2) . . Comparison of Electronics (some R2C2 updates)
- 16:20, 17 January 2012 (diff | hist) . . (+42) . . Wallace (→Parts: double the 623 bearings needed for the double-bearing idlers.)
- 14:34, 16 January 2012 (diff | hist) . . (+123) . . Pololu Electronics (→Teensy Breadboard)
- 14:10, 16 January 2012 (diff | hist) . . (+48) . . List of Firmware (→Teacup: -- add firmware code size)
- 13:55, 16 January 2012 (diff | hist) . . (+30) . . m Teacup Firmware (→Design Goals)
- 13:50, 16 January 2012 (diff | hist) . . (+36) . . m Marlin (→Quick Information)
- 12:20, 16 January 2012 (diff | hist) . . (+1) . . m Wallace (→Parts)
- 12:20, 16 January 2012 (diff | hist) . . (-1) . . m Wallace (→Parts)
- 17:27, 12 January 2012 (diff | hist) . . (+396) . . Pololu Electronics (→Sanguinololu)
- 15:48, 12 January 2012 (diff | hist) . . (+81) . . Teacup Firmware (→Design Goals)
- 23:33, 9 January 2012 (diff | hist) . . (+5) . . m Printrbot (→Specifications)
- 23:21, 9 January 2012 (diff | hist) . . (+129) . . Printrbot (→Specifications: Add links to electronics)
- 23:19, 9 January 2012 (diff | hist) . . (+4) . . m Teensylu (→Known Variations)
- 23:19, 9 January 2012 (diff | hist) . . (-2) . . Teensylu (→Known Variations)
- 22:45, 9 January 2012 (diff | hist) . . (+133) . . Teensylu (→Known Variations)
- 21:54, 9 January 2012 (diff | hist) . . (+8) . . m Teensylu (→Schematics)
- 22:38, 8 January 2012 (diff | hist) . . (+71) . . Teensylu (→Schematics: -- add link to github source for schematic and board)