Snapdragon

From RepRap
Revision as of 14:23, 7 June 2011 by Wildseyed (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
Snapdragon

Release status: experimental

Snapdragon Five Faces Color.PNG
Description
A fully printable RepRap, influenced by the MTM Snap 3D CNC design by Jonathan Ward. Requires only M4 screws and nuts for frame assembly.
License
GPL
Author
Contributors
Based-on
Categories
CAD Models
Coming very soon
External Link


Bill of Materials (The Vitamins)

This section is under development, and may change frequently, and without notice.

  • 4 - Nema 17 Stepper Motors
  • 3 - 5mm to 8mm Aluminum Flex Couplings (I'm working on something printable to replace these...)
  • 6 - 608 Roller Bearings
  • 4 - 5/16" x 12.5" Smooth Rod
  • 2 - 5/16 x 8" Smooth Rod
  • 2 - 5/16 x 12.5" Threaded Rod
  • 1 - 5/16 x 12.5" Threaded Rod
  • 12 - 5/16" Nuts
  • 24 - 1/4" Flat Washers
  • 100 - #6 x 1/2" Pan Screws
  • 100 - #6 Nuts
  • 8 - 1/2" I.D. Rubber Feet, or substitute (optional)