SmartBoxRap 6"

From RepRap
Revision as of 20:10, 8 April 2014 by Bodgeit (talk | contribs)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
SmartBoxRap 6"

Release status: experimental

Description
A derivative of Smartrap mini. Low cost low tech.
License
[[]]
Author
Contributors
Based-on
Categories
CAD Models
External Link


Introduction

For the last Five years I have been building various RepStrap versions of Darwin and Mendel trying to devise simple ways to build these printed self replicating machines. SmartBoxRap 6" is based on all of the experience gained building the previous RepStraps.

Features

Belt drive, Bowden Extruder, J-Head_Lite, Heated Bed, Removable print plate. True 6" cube print volume. 1-2 hour build time > 50 screws

Statistics

Build plate 160mm x 170mm Heated bed 160mm x 160mm Build Volume 152.4mm x 152.4x 152.4 or 6" cubed