Slicer
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Slicers create the instructions for the machine(gcode) from a 3d model. The instructions are basically setting temperature, and a path with a rate of flow. How this is generated can in large part effect how the object will come out.
- Skeinforge (wiki, download)
- Slic3r,(web, github)
- Cura (web, [https://github.com/daid/Cura github)
- RepRapPro_Slicer
- Kisslicer(not open source)
- E3D(probably wip)
The page Useful_Software_Packages might also contain useful info.
