RepRapPro Huxley print settings

From RepRap
Revision as of 07:17, 5 November 2012 by SallyRepRap (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page will become more useful as more data is added, so please feel free to add to this table:

Material Bed Temp Nozzle temp Comments
Faberdashery Arctic White PLA 55C 200C Has been proven to stick to bare Aluminium as well as Kapton.
Orbi-Tech red PLA 60C 195C Works with Kapton, best results with 0.4mm layers
Orbi-Tech transparent PLA 75C 195C Works with Kapton, best results with 0.4mm layers
Sun Ya Tech White ABS 110C 220C Sticks well to Kapton and glass with no warping