RepRapPro Huxley print settings

From RepRap
Revision as of 12:00, 4 November 2012 by Adrianbowyer (talk | contribs)
Jump to: navigation, search

This page will become more useful as more data is added, so please feel free to add to this table:

Material Bed Temp Nozzle temp Comments
Faberdashery Arctic White PLA 55C* 200C Has been proven to stick to bare Aluminium as well as Kapton.
Orbi-Tech red PLA 60C 195C Works with Kapton, best results with 0.4mm layers
Orbi-Tech transparent PLA 75C 195C Works with Kapton, best results with 0.4mm layers
Sun Ya Tech White ABS 110C 220C Sticks well to Kapton and glass with no warping
  • Recent prints utilising most of the bed area have exhibited some warping, which cannot be eliminated by the application of nail polish remover. We have dropped the bed temperature to 85C and the parts appear to adhere better to the bed. If more people report the same experience, we could update the table with the new value.