RUG/Pennsylvania/State College/Printers/Thing-O-Matic

From RepRap
Revision as of 16:20, 3 May 2014 by Jarred (talk | contribs) (Operating Specifications)
Jump to: navigation, search

Unit makerbot mk6plus.png




Operating Specifications

Operating Specifications
Name Status Design Electronics Firmware Extruder Temperature Comments
ToM Mk6+ ToM 6+ Working Makerbot Thing-O-Matic Generation 4 v3.1 Stepstruder Mk6+

Controller: v3.6 w/Atmega 168

225C Working correctly. Use ReplicatorG 0037 and SF35. ABS ONLY, no PLA.

Current Status

Date Notes
1 April 2014 Successfully printed a service print on the bot
29 April 2014 First successful complete print
15 April 2014 Parts warping badly. Strange settings issues.
27 February 2014 Replacement IC arrived
29 February 2014 Replacement chip installed
17 February 2014 Infamous toolhead 0 not found issue. Suspecting an IC on the motherboard or EC

Details

PSU Unit ToM

  • Model: Makerbot Thing-o-Matic Mk6+
  • Owner: Dr. Timothy Simpson
  • Bot No. 4283
  • Assembled: December 2011

Gallery

Maker Bot5 12.JPG

Jarred (talk) 11:39, 2 May 2014 (PDT)





State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg