RUG/Pennsylvania/State College/Printers/PSU Unit Yellow

From RepRap
Revision as of 09:46, 22 April 2013 by Btz5006 (talk | contribs) (Work in Progress)
Jump to: navigation, search
Teamyellow.JPG



Introduction

This page is dedicated to the PSU Unit Yellow 3D printer. This unit will follow the design of the Open Hybrid Mendel developed by students of the EDSGN 497 class at The Pennsylvania State University.

This printer is mainly comprised of yellow frame pieces. The Z axis motors are a unique green color because those parts were printed on the makerbots in the PSU Learning Factory.

Operating Specifications

Operating Specifications
Name Status Design Electronics Firmware Extruder Running Temp Comments
Yellow Yellow Not complete Ohm RAMPS ??? ??? ???C

Work in Progress

Frame The frame of the printer has be completed. The y axis bed frame has also been finished and needs installed. An entruder has been printed and assembled and is waiting for the x axis to be finished. Electronics The Ramps board has been soldered and mounted on the frame. It is missing some motor drivers because some were robbed to provide working driver boards for the Rainbow and Orange 2 printers.

Builders

Spring 2013 Yellow team:

Btz5006, Djl5217, Vatlark, MarkKeller22

State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg