RUG/Pennsylvania/State College/Printers/PSU Unit White

From RepRap
Revision as of 17:34, 1 December 2011 by Edk5035 (talk | contribs) (Print Problems And Solutions)
Jump to: navigation, search
White small.png



This page is for information about the PSU Unit White (Ψ). This unit is of the Mendel/Prusia hybrid variety. All of the printed parts were printed by other units in our group.

Printer Status

Status: OperationalDot2.jpg

Operating Temperature: 201 (ºC)

Needs: Spool Arms


PSU Unit White - Current Condition

Print Problems And Solutions

PROBLEM
SOLUTION
Prints were leaning to one side.
Reattached the Y-axis pulley securely.
Motors were getting very hot.
Adjusted the potentiometers so the motors had just enough power to drive the axis and run the extruder.
Tip temp. read '2511' in Repsnapper.
Reconnected thermocouple more securely.

Assorted Prints

Video

<videoflash type="youtube">NUG-33G0zaU?hd=1</videoflash>

White Team Members

This machine was assembled by:

  • Nicholas Whalen
  • Michael Testa


State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg