RUG/Pennsylvania/State College/Printers/PSU Unit White

From RepRap
Revision as of 17:02, 1 December 2011 by Edk5035 (talk | contribs)
Jump to: navigation, search
White small.png



This page is for information about the PSU Unit White (Ψ). This unit is of the Mendel/Prusia hybrid variety. All of the printed parts were printed by other units in our group.


Status: OperationalDot2.jpg

Operating Temperature: 201 (ºC)

Needs: Spool Arms


PSU Unit White - Current Condition

Print Problems And Solutions

PROBLEM
SOLUTION
Prints were leaning to one side.
Reattached the Y-axis pulley securely.
Motors were getting very hot.
Adjusted the potentiometers so the motors had just enough power to drive the axis and run the extruder.


Assorted Prints

Video

<videoflash type="youtube">NUG-33G0zaU?hd=1</videoflash>

White Team Members

This machine was assembled by:

  • Nicholas Whalen
  • Michael Testa


State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg