RUG/Pennsylvania/State College/Printers/PSU Brown and Blue

From RepRap
Revision as of 20:12, 11 December 2014 by Gmy5011 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Blue brown.png
Blue brown.png
Brown and Blue
Color: Brown and Blue
Extruder: .40mm
Temperature: 230C
Design: Open Hybrid Mendel
Electronics: RAMPS
Firmware: Marlin
Operation Status: Thumb down.png

Introduction

This is the page for the State College Rep Rap User Group's (SCRUG)Brown and Blue 3D printer. The printer was developed, assembled, and is currently operated by students in Penn State's Engineering Design 497J course and members of the 3D printing club. Our goal is to continuously tweak the printer until it is ready for distribution and sale to other departments in the University and local schools and businesses.

This printer is mainly comprised of blue frame pieces with brown x-vertices.

Photos

Side View.jpg

Front View.jpg

Top View.jpg

Log (Issues & Modifications)

Date Modification / Problem
November 11, 2014 New Hot tip installed, Still issues with clogging to be resolved.
October 22, 2014 Hot tip clogs off and on. Have to pause print, raise z-axis, extrude and push filament through till flowing smoothly again.
October 22, 2014 Extruder gear tighten.
October 21, 2014 Extruder motor gear is loose.
October 16, 2014 Running

Operators

Currently Operated by



State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg