PrintMATE 3D

From RepRap
Revision as of 13:41, 22 December 2013 by PrintMATE3D.com (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Template:PrintMATE 3D - Lasercut Optimized Prusa i3

Crystal Clear action run.png
printMATE 3D

Release status: working

PrintMATE 3D.jpg
Description
Prusa Mendel Iteration 3, optimized for lasercut.
License
CC BY-NC-SA
Author
Contributors
Based-on
Categories
CAD Models
External Link


The machine and the assembly instructions are licensing by CC. Files are available here :

http://printMATE3D.com/downloads


printMATE 3D presentation

The Prusa Mendel i3 is the third version of the open source 3D printer Prusa Mendel. Our version is based on an aluminium frame cut by water jet cutter and threaded rods. Axis motion are made on linear bearings, belts and pulleys or threaded rods and NEMA 17 motors.

Improvements

  • Extruder upgrade: Magma Hotend (by Trinity Lab) support.
  • New cooling fan duct for Magma Hotend.
  • Y Idler with a tensioner system.
  • X End Idler with endstop holder.
  • Upgrade X End Idler in order to support 624 bearing.
  • Y Motor with endstop holder.
  • Addition of Z endstop Holder in situ.

Sources

Help and support

You can contact us with the following websites : http://www.printMATE3D.com