Ohm/How to build an OHM

From RepRap
Revision as of 18:18, 15 November 2012 by Nop5031 (talk | contribs) (Proposed Updates)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!


Introduction

The Open Hybrid Model (OHM) has several advantages over the generic Mendel model. Mainly, it is more flexible. The printing board is designed to easily pop off the machine without unscrewing any parts.

All STL files mentioned in this article are referring to and can be downloaded from OHM Parts section.


Proposed Updates

--Nop5031 22:04, 15 November 2012 (UTC)


1. Add info to

  1. X-Z Assembly
  2. Drive System
  3. Open Y Axis
  4. Carriage
  5. Extruder
  6. Spool Arm

2. Organize Page Map

  1. Delete unnecessary links
  2. Put links in perspective sections
  3. (May have to make personalized custom links)

3. Upload Pictures of parts 4. Pre-printing Procedures

Mechanical Construction

Frame

To make the frame triangles, 6 frame vertices, 2 bar clamps and 6 threaded bolts are needed.

Frame Vertex part
Bar Clamp part

X-Z Assembly

Z Drive System

OpenY Axis

Carriage

Extruder

Spool Arm