My Development Page Sheet Metal Mendel
Revision as of 07:04, 31 March 2014 by Spectrum Stephen (talk | contribs) (→Sheet Metal Mendel: Capitalisation)
Sheet Metal Mendel
Purpose is to build a Mendel-RepStrap out of sheet metal parts.
These are Lasercut Stainless steel parts from 2mm and 5mm plate material.
Mixed with standard Mendel type fasteners and "a few reprapped parts".
This is only for the X-carriage and geared extruder parts to spare weight (= mass).
Project Start
As in every project it begins with an idea!!
Real Time
First parts arrive at the building site.