MungStruder

From RepRap
Revision as of 07:56, 3 April 2011 by Mung (talk | contribs)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
Mungstruder

Release status: working

Description
documenting a generic tool/artpiece
License
Author
Contributors
Based-on
Categories
CAD Models
External Link


Introduction

This is a design which has the following design criteria:

Smallestest, Lightest, Fastest, Cheapest, Bestest.

Mostly the design is just a test.


I just had a spare half hour today so thought i would edit a wiki page. Check my forum posts [1]

I did some volumetric calculations and it looks like the entire extruder should weight about 14g for the four filament version (excluding motor and electronics weight)


Hopefully the prototype will start being constructed in three weeks?



Bill of materials

no. off part
4 M4 x 25mm bolts
25mm 25mm square 3mm wall alloy box section
20mm 20mm diameter brass
4 M3 x 20 screws
1 coke can
? 5mm plywood
6 10R resistors 3W
1 thermocouple
200mm connecting wires
2 bootlace ferrules
a few ml fire cement
50 mm 2mm heat shrink sleeving


Tools

Lathe drills etc..