Mowi printer

From RepRap
Revision as of 04:55, 30 October 2013 by Mowi (talk | contribs) (added links to bill of materials)
Jump to: navigation, search
Crystal Clear action run.png
Mowi Printer

Release status: experimental

Mowi Printer.jpg
Description
The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.
License
GPLv3
Author
Contributors
Based-on
Categories
Foldable RepRap, Development
CAD Models
External Link
soon


Introduction

The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing. The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.

Specifications

  • Printing Size: 260mm x 200mm x 195mm
  • Folded size: 400mm x 330mm x 86mm
  • Printed Parts: 10
  • Lasercut parts: 21
  • Bought Parts: ???
  • Electronics: Ramps 1.4

Main Open Issues

  • The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)
  • The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage.
  • X- Carriage can only be printed with support and needs a lot of cleaning.
  • Dual extruder calibration.
  • Easier Assembly
  • Less different vitamins

Bill of Materials

Most parts can be bought at a number of suppliers, the links are only an example.


For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)