MondoZAxis

From RepRap
Revision as of 19:50, 25 January 2012 by Mnk5084 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Assembly Tip

After assembling the Z-axis, some may find that the Mondo rests on the pulleys at the bottom of the Z axis instead of the Mondo's frame. There are many add-on, printable feet available on Thingiverse to alleviate this problem. Two examples are here: [1], [2].

Z Drive Bars

Photo of the stack for assembling a Z drive bar
Photo of the parts used in the Z drive bars
Photo of an assembled Z drive bar


Z Axis

Photo of the parts used in the Z axis
Photo of how to position the Z drive bars
Photo of how to attach the Z drive bars
Photo of positioned Z drive bars with drive cogs reattached
Photo of how to attach the Z smooth bars on top
Photo of how to attach the Z smooth bars on bottom