Mendel circuit boards

From RepRap
Revision as of 20:26, 11 October 2009 by Skinnyed (talk | contribs)
Jump to: navigation, search

You may find the assembly data sheet useful during assembly.

Top circuits

BOM

Total # of assemblies: 1

Name Qty/assembly Total Qty Type
motherboard-plate.par 1 1 Sheet
extruder-controller-v2-2.par 1 1 PCB
reprap-mother-board-v1.1.par 1 1 PCB
m3-capx20.par 6 6 Fastener
m3-nut.par 12 12 Fastener
m3-nylock.par 6 6 Fastener
m3-washer.par 24 24 Fastener


Assembly

M3 nuts are used as spacers to elevate the boards slightly. This will help get your wiring neater later.

Circuit-board-top-assembly.PNG


Bottom circuits

BOM

Total # of assemblies: 1

Name Qty/assembly Total Qty Type
stepper-plate.par 1 1 Sheet
xlr-bracket_1off.par 1 1 RP
stepper-motor-driver-v2-3.par 3 3 PCB
usb-female-b-type.par 1 1 Electronics
usb-female-pcb.par 1 1 PCB
xlr-female-d-type.par 1 1 Electronics
m4-nylock.par 14 14 Fastener
m4-washer.par 52 52 Fastener
m4x16-cap.par 12 12 Fastener
m4x40-cap.par 2 2 Fastener

RP parts

Circuit-board-bottom-printed-parts.PNG


Assembly

Stepper driver PCBs are elevated from the sheet by two washers.

Circuit-board-bottom-assembly.PNG



Back to Mendel mechanical construction root.