Mattroberts' Huxley Carriage

From RepRap
Revision as of 17:33, 3 August 2012 by Mattroberts (talk | contribs) (Created page with '{{Development |status = Working |description = Replacement RepRapPro Huxley X-Carriage |license = GPL |author = Mattroberts |reprap = RepRapPro_Huxley |cadModel = [[File:MR_Huxle…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Crystal Clear action run.png
Mattroberts' Huxley Carriage

Release status: Working

No image available.png
Description
Replacement RepRapPro Huxley X-Carriage
License
GPL
Author
Contributors
Based-on
Categories
CAD Models
External Link


A replacement x-carriage for RepRapPro_Huxley. I wanted to be able to replace the print head with other designs, without stripping the RP part with self-tapping screws. This adds 4 nut-traps to the carriage, so that shouldn't be a problem anymore.

The tweak is done using OpenSCAD, source code (and original part) is included.

What you need

  • 1x RP part
  • 4x M3x20mm countersunk screws
  • 4x M3 nut