LulzBot/AssembledPrusaMendel
Release status: Working
| Description | Truly free/libre 3D printer
|
| License | GPLv3
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Intro
The Lulzbot Prusa Mendel is a slightly tweaked version of the RepRap Prusa Mendel 3d printer. Most of the small tweaks made were for sustainability, ability to upgrade, and to streamline some of the building process. Otherwise, the Lulzbot Prusa Mendel is very similar to the popular Prusa Mendel build.
Here you will find more info about the printer, where you can buy one, how to get your Lulzbot printer setup and running, and version updates.
**BEFORE YOU OPEN YOUR PRINTER**
If you have just received your printer, congrats! You're so close to printing cats and moustaches but before you unpack your printer be sure to read the instruction manual. The manual includes instructions on unpacking the printer and setting it up. You can also find the instructions here on the RepRap wiki by going to the Getting Started page. The wiki page will contain some extras that you can not find in the printed manual so be sure to check it out.
==
