Laser Cut Mendel Pulleys

From RepRap
Revision as of 22:07, 2 February 2010 by TheOtherRob (talk | contribs)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
Laser Cut Mendel Pulleys

Release status: experimental

No image available.png
Description
License
unknown
Author
Contributors
Based-on
Categories
CAD Models
External Link

Mendel uses belt pulleys in driving it's x,y and z axis as well as in it's driven z axis threaded rods. The problem is that many cheap 3d printers such as the Makerbot, RepRap, etc. are still working on being able to print accurate parts. The lack of symmetry in these parts caused by printer inaccuracy can then cause further inaccuracy in the child printer. This is a version of each gear in Mendel that can be cut by a high precision laser cutter or CNC mill so as to increase the precision of Mendel.

This page/project is under development. Please do not use the files provided until this message is removed

DXF Files

drive-pulley_3off

z-driven-pulley_2off.par