Hot End Comparison

From RepRap
Revision as of 18:13, 17 March 2014 by Ohioplastics (talk | contribs)
Jump to: navigation, search


Hot end designers are encouraged to add their hot ends in the table below, as well as start a wiki page where lists of suppliers can be put.

  • this table is for hot ends only, it is not a supplier list, add your supplier list to the wiki page associated with the hot end


Hotend name Designer Mount type Direct/Bowden Build Material Filament Sizes (mm) Nozzle Sizes (mm) license Wikipage/Link Reviews & Additional notes
E3D - V5 Sanjay Modified Groove Mount Both All Metal 1.75/3 0.25/0.3/0.35/0.4/0.6/0.8 CC BY-NC-SA 3.0 Wiki Page, E3D Online Forum Discussion
Aluhotend V5B Thejollygrimreaper 4.6mm Groove Mount (same as jhead) direct (bowden with printed adapter) stainless/aluminium/brass/ptfe liner 1.75 0.3/0.5 NC (to be revised) Wiki Page, Webstore -
J-Head Mk V Brian Reifsnyder Groove Mount Direct; Bowden with Adapter PEEK/PTFE/Metal 1.75/3 0.35/0.45/0.5 GPL Wiki Page, hotends.com -
Merlin Srek (Björn Marl) M10/J-Head Adapter Both PEEK/PTFE/Brass 1.75/3 0.2/0.3/0.5 CERN OHL 1.2 Merlin Blog -
Argento jameghino (Javier Ameghino) Groove Mount same as jhead Both stainless steel/aluminum/brass/PTFE liner 1.75 0.4 CC BY-NC-SA 4.0 jfa3D.com.ar -
J-Head Lite Ohio Plastics 3/8" Groove Mount direct (bowden with printed adapter) PTFE Holder, Stainless Steel Barell, Aluminum Heater Block, Brass Nozzle 1.75 .4, .35, .3, .25, .2 Creative Commons Attribution Share Alike Thingiverse, Ebay -
sample entry sample sample sample sample sample sample sample sample sample


See Also

Forum discussion: Best hot end