HackerBot RPi3 - 7" Touch LCD
Revision as of 15:59, 6 July 2016 by Balestrino (talk | contribs)
HackerBot Documentation
How to install Octoprint
- Download OctoPi: https://github.com/guysoft/OctoPi
- Stricly follow: https://www.raspberrypi.org/documentation/installation/installing-images/README.md
- Configure your WiFi by editing octopi-network.txt on the root of the flashed card when using it like a thumb drive
- Connect RPi and login using as login: pi/raspberry
- follow these instructions: https://github.com/BillyBlaze/OctoPrint-TouchUI/wiki/Setup:-Boot-to-Browser-(OctoPi-or-Jessie-Light)
- run from RPi: sudo nano /boot/config.txt then add lcd_rotate=2
- from your PC brower: http://octopi.local
- update if needed, then install TOUCHUI plugin and enable it
