Francisco
Revision as of 18:48, 5 July 2010 by Pakito15191 (talk | contribs)
| Description | 3D Circular printer prints with 3 different materials
|
| License | |
| Author | |
| Contributors | |
| Based-on | |
| Categories | Gada Prize
|
| CAD Models | |
| External Link | none
|
Contents
Project Description
I want to create a RedRap able to replicate itself and able to do good quality items. It has also not to be too big compared to the printing volume. This will probably take a while.
Project Goals
The goals are:
- Create a rotative bed that doesn't occupy more than the 150% on the plane XY of the printable space (which is impossible with the actual mendel model)
- The printable area is 300x300x100, but as it's a cilyndre, it's Radio 220mm and Height 100mm
- If possible, a metal piece will remove the finished piece from the bed and clean it
Working Notes.
Files and Parts
Firmware Downloads
Firmware
