FlexShaftHolder

From RepRap
Revision as of 15:03, 22 November 2010 by Buback (talk | contribs) (categorized)
Jump to: navigation, search
Crystal Clear action run.png
FlexShaftHolder

Release status: working

Flexy shaft.jpg
Description
A flexy shaft holder for Mendel.
License
unknown
Author
Contributors
Based-on
Categories
CAD Models
External Link
This page has been flagged as containing duplicate material that Flex Shaft milling-toolhead also attempts to cover.
These pages should be merged such that both pages do not attempt to cover the duplicate topics.
This is 600 pixels wide, and on the left.


FILE ID# TYPE DESCRIPTION AVAILABLE FORMATS CREATED/RESERVED BY
drzac_mendel.stl STL file STL file you need to print to make a FlexShaftHolder .stl.zip, .stl.bz2 --Bogdan.kecman 201011140622


description

This Flex Shaft milling-toolhead FlexShaftHolder is A flexy shaft holder for Mendel by thingiverse user arhimed (Bogdan Kecman).

development

Developed by Bogdan Kecman after some discussion in the BitsFromBytes forum. (photo of this FlexShaftHolder mounted on a Mendel)

design files