File:PrototypePrintable pins someDirectional.jpg

From RepRap
Revision as of 01:58, 25 August 2019 by Jamesdanielv (talk | contribs) (proto-type 2,3,4 pin connectors for printrbot project. some are directional for pins like fan, and dc heater connectors.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
PrototypePrintable_pins_someDirectional.jpg ‎(519 × 321 pixels, file size: 79 KB, MIME type: image/jpeg)

proto-type 2,3,4 pin connectors for printrbot project. some are directional for pins like fan, and dc heater connectors.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:58, 25 August 2019Thumbnail for version as of 01:58, 25 August 2019519 × 321 (79 KB)Jamesdanielv (talk | contribs)proto-type 2,3,4 pin connectors for printrbot project. some are directional for pins like fan, and dc heater connectors.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerApple
Camera modeliPhone 6s Plus
Exposure time1/4 sec (0.25)
F Numberf/2.2
ISO speed rating200
Date and time of data generation22:53, 24 August 2019
Lens focal length4.15 mm
Latitude44° 50′ 44.37″ N
Longitude123° 13′ 44.06″ W
Altitude59.764 meters above sea level
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software used12.4
File change date and time22:53, 24 August 2019
Exposure ProgramNormal program
Exif version2.21
Date and time of digitizing22:53, 24 August 2019
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
APEX shutter speed2.0000634799721
APEX aperture2.2750071245369
APEX brightness-2.1759831004225
APEX exposure bias0
Metering modeSpot
FlashFlash did not fire, compulsory flash suppression
DateTimeOriginal subseconds716
DateTimeDigitized subseconds716
Supported Flashpix version0,100
Color spacesRGB
Sensing methodOne-chip color area sensor
Scene typeA directly photographed image
Exposure modeAuto exposure
White balanceAuto white balance
Focal length in 35 mm film29 mm
Scene capture typeStandard
GPS time (atomic clock)05:53
Speed unitKilometers per hour
Speed of GPS receiver0
Reference for direction of imageTrue direction
Direction of image255.81773399015
Reference for bearing of destinationTrue direction
Bearing of destination255.81773399015
GPS date25 August 2019
IIM version2
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:PrototypePrintable_pins_someDirectional.jpg&oldid=186128"